Recent content by Chris Cotter

Use a DMX controller that takes midi commands. Give them some cheap midi controlers to use. YOU CAN GET BIG BUTTON BIG KNOB MIDI CONTROLERS

Try a few egg strobes

Try this !Try this ! https://www.frightprops.com/picoboo-plus.html

Do ghe current drivers have a pre-heat ? If so you might be able. to turn down the pre-heat potentiometer

It has been researched. Check for yourself. I also said to avoid frequency around 14 pps not especially 14. I would say 10 and 18 pps to give some leeway.

I used a ping pong ball cut in half with a red grain of wheat bulb inside you can get them from train hobby places

Hi In 1983 I was the light tech for a nightclub in Chattanooga Tennessee and I worked there about 7 years total time. Part of which I ran Lights on the weekends. We had a big dance floor with 4 large strobes all connected to a strobe control box. It could do simultanious flash or sequence the 4...

What is a pickle ?

I had a par 64 go out once and it sounded. Like a shotgun going off !!!

Use a piece of fishing line fastened to a bunny cord which is hidden above and fastened to a fixed bar etc..... using the combo works. The fishing line is pulled by the bunny cord all you need to do is place bungey up out of view.

Hi Jerry. Thanks for the alert. Can you get me a list on available items?

What items do you have in SERIES 200?

No do not. Never parrallel DMX wiring! Does the light have DMX IN and a DMX out? If so always daisey chain and terminate last light in chain . [email protected]

Hi i am looking for a Series 200 DMX200? Also one DMX ACS MiniRack. Lamp cables etc.

I am looking for a Vari*Lite DMX200 interface Thanks Chris