ChrisB_SanDiego
Latest activityPostingsAbout
-
-
ChrisB_SanDiego reacted to Larry Beck's post in the thread Obsidian Train the Trainer initiative bearing fruit with
Like.
Last November, Obsidian Control Systems initiated Train the Trainer workshops aimed at training its European partners on the specifics... -
Spigot, possibly? You could try calling Altman, assuming I have the type correct. As far as I know, the spigots are pretty much...
-
ChrisB_SanDiego replied to the thread Conventional Fixtures Micro Ghost Lights.Maybe a little unconventional, but I vote you braze it, and possibly leave the metal unfinished. It'll be more personal, and after time...
-
ChrisB_SanDiego replied to the thread Etcnet2 Node Dropping edmx.That's also how MAC filtering works on one our networks. Everything works for a bit and then the device is booted from the network.
-
If it's works for the first 3-5 minutes, then stops, it sounds like an IGMP issue on the switches. See if you can disable IGMP Snooping...
-
All good my friend. I'll go out on a limb and say that everybody here on Control Booth has been where you are. OK, so let's go through...
-
ChrisB_SanDiego replied to the thread Simultaneous cues on ETC Ion running EOS.Based on what your saying I can only make some guesses. It sounds like the cyc is stored in multiple places.Some of the most common...
-
ChrisB_SanDiego reacted to danTt's post in the thread Best practices as house when hosting touring production's lighting network with Like.
You have a lot of really good points here.I'm going to address one aspect of it, with a potentially incendiary statement.If you're a...
-
ChrisB_SanDiego replied to the thread Etcnet2 Node Dropping edmx.Some things you can check:Check for compatibility...
-
ChrisB_SanDiego reacted to robmerow's post in the thread Keeping a gobo in focus while running a pan/tilt effect with Like.
Instead of a pan/ tilt effect, make a cuelist chase with a cue per position. Then you can aim and focus it for each. Then just chase...
-
ChrisB_SanDiego reacted to TimMc's post in the thread Best practices as house when hosting touring production's lighting network with
Love.
The tl;dr - Treat your show networks with the same level of security and access control that would be used for box office... -
ChrisB_SanDiego replied to the thread Best practices as house when hosting touring production's lighting network.You ask some interesting questions. I was a house tech for 15 years, now I do more design and consultation. On average, we had around...
-
ChrisB_SanDiego replied to the thread Open 4/12, dmx decoder/LED tape works from board not stage..I second checking the universe first. You already know you have communication from that electric to the console because of the Altman's...
-
ChrisB_SanDiego reacted to NJLX's post in the thread Open 4/12, dmx decoder/LED tape works from board not stage. with Like.
To clarify on RDM - I don't expect the decoder to have any RDM functions, but one of the troubleshooting steps we usually recommend is...
-
ChrisB_SanDiego reacted to NJLX's post in the thread Open 4/12, dmx decoder/LED tape works from board not stage. with Like.
#1 - Your link to the decoder is the same as the link to the LED tape.#2 - Are your decoders(generic RGBW fixtures) patched in the...
-
-
Loading…
-
Loading…