Recent content by cosmicink

It was a bad ballast! Swapped it out with the one from the other working beam and it fixed the issue. Thank you for your time and assistance.

Yes, that's correct. I have attached a pic of the head with the therm removed.

Just made it public, sorry about that!! here is the url again Thanks!

Here you go!

To answer your questions, it cuts out, does not fade out. Fading in, restriking an arc ( I have a video of the behavior I could email over, I tried posting here as an .mov attachment without luck). At this point I have removed the thermostat and testing it without it attached and the behavior...

Thanks! I was hoping for a quicker fix than that, but if that's what I have to do, then so be it. Thank you for your assistance. I will keep you posted. Thanks again!

Powering with 120. Controlling with DMX 192-512 board. Same behavior observed in TEST mode. Had not done that before, so just performed it and it displayed the same behavior.

Cleaned it today, has been cleaned once before. Fixture is displaying the same behavior with the enclosure off. Verified BOTH fans are operational. My first guess was overheating so I removed the enclosure and tested it, no change. No Error Codes.

Hello, I have a Beam 2R from elation that has been having lamp issues. The lamp fades out after 10 minutes of fixture usage then fades back in after being off for about 3-5 minutes(haven't exactly timed it). This keeps happening when the fixture is operating. The lamp has 412 hours of usage and...