Recent content by CPayneLighting

Chauvet Rogue R2 washhttps://www.chauvetprofessional.com/products/rogue-r2-wash/

I would have to second RickR.As a programmer/ LD for a corporate event company, I find myself on different consoles, and in different venues almost daily. I find that prepping paperwork such as Plots, Magic Sheets, Channel and Dimmer hookups etc., incredibly helpful with short turns. Also...

After doing some research I wasn't able to find anything, and my assumption would be that they do not make one for 2 reasons. Firstly, there is little clearance inside moving fixtures for the thickness that a prism has, and secondly because the gobo wheels are so far back from the lenses that...

I have had good luck with the Chauvet Geyser RGBHere's an ok video of them in use outside on a show I designed.

I'm not totally sure how to determine if the power needs of the I-Cues and Scollers would be more than what the PSU can provide (I've almost exclusively worked with just conventional fixtures until recently). How do I do that?After doing some digging from everything I've found it looks like...

I'm planning to operate 4 Chroma-Q Scrollers and 2 I-Cues off a 4-pin cable run from a Chroma-Q PSU we own. The cables would go from the PSU, to 2 scrollers, then to the 2 I-Cues, then to the last 2 scrollers, and back to the PSU to complete the connection.I would make sure the power output...

You might be able to still get plates for them. Are they the color pro 10s? Or you can always have some custom made from a local fab shop.

There is a channel spreadsheet in blind

How Detailed are the gobos you want to make? Are they black and white or colored? I have had some luck with making custom gobos with glass cut from a local shop and heat resistant black grill paint in source 4s before. But these were for a complex shutter cut onto a scenic piece.

My senior thesis project in college was a show in black and white. For lighting I used R3202 and R3203 plus R98 (to help adjust for amber shift). Plus I worked very closely with costumes, makeup and scenic designers for color choices. there are many different color blacks out there for paint...

Yes the ADJ Wifly RGBW8C Wireless Controller will control them in 7-channel mode but you can only use the console in fader bank mode, because with the 7 channel mode on the slim pars has a separate intensity parameter that the presets do not take into account.The colorpallete fixtures can...

Well starting with repair, most companies offer repair certification classes through their manufacturer or distributor, but these can be very expensive. I would see if you can find anyone in your area that does repair, for example rental houses or the master electrician in your local theaters...

This is a known problem with the fixtures. There is a problem with the data transfer internally. The company has an add on wire harness that you can get from them. here is the tech bulletin about the install.

Well that all depends on what you are looking for.For Stage Managers, apps that I've found useful are a simple PDF editor, you can scan in your script then you can type notes, highlight lines, insert pics, really anything you want. then you can email out, or print script updates very easily...

I've run into the same problem. sometime VW has a space after the symbol name that LW gets rid of. The easiest way to solve this problem is to drop a new fixture into VW go into the object info, then copy the symbol name. Then go into LW Maintenance>Instrument type Then on the top of the pop up...