Recent content by DJZ

Re: Chauvet Obey 40 problem.I when i hooked up the Radius 2.0 by itself, i tried it with and without a terminator and the light would not DMX. Once I hooked up the light in a DMX chain, all the lights, including the radius 2.0 works fine. I have not connected the terminator because i'm only...

Re: Chauvet Obey 40 problem.UPDATE: I hooked up some other DMX lights, then i hooked up the Radius 2.0. Now, all the lights can be controlled. I don't get it, the radius 2.0 was not even reading the controller when connected by itself. But when i connected it in a chain, they all work...

Re: Chauvet Obey 40 problem.Thanks for all your help and patience. I'll work on it again. I've got new dmx lights coming in so i will try those

Re: Chauvet Obey 40 problem.Ok, let me see if I've understood you...By doing a factory reset, I've put the faders and channels out of sequence? So, i would need to re-program the channels and faders? When I've tried to address the light with the proper DMX channel, I had my DMX cable plugged...

Re: Chauvet Obey 40 problem.Should I be unplugging my DMX cables when programming the channel or it doesn't matter?

Re: Chauvet Obey 40 problem.I did exactly that...scrolled to 512, hit enter, then scrolled to channel 1, and hit enter. When i switch the polarity switch, it seems to controll very mininal aspects, but when i put it back to what i've always used, it won't work.

Re: Chauvet Obey 40 problem.It's seems like it's defaulting to that mode because i scroll the menu to the dmx setting, then i select channel 1, but nothing happens. i have a chauvet radius 2.0 light

Re: Chauvet Obey 40 problem.Well, it's weird because i put the light in dmx channel 1, but when i tap the light pole, it changes on it's own. It doesn't seem to be reading the DMX signal. This happened when i did a factory reset to clear all scenes and chases.

Re: Chauvet Obey 40 problem.Well, i hope someone can help. I purchased a brand new Chauvet Obey 40 controller and had it for approx. 2 weeks. I've been controlling both of my lights with no problems. I removed and sold one of the lights and reset my controller to clear out the programmed...