Recent content by domiii

  1. D

    Mapping Five projectors to a single computer

    Not to muddy the waters with another suggestion, but this is what I've done in the past is this and it works.Put the video computer (or two) on the stage connected to your network (using that cat 5 cable you have from the booth). Use that for your projections. Then have your sound booth...
  2. D

    Snow Machines

    Has anyone used the Antari S-200X snow machine?How quiet is it?Here is a link to the specs http://www.elationlighting.com/s-200x-silent-snow-machine
  3. D

    New Sound PC

    Got about $900.00 to spend on a new sound PC for our small (99 seat) community theatre.We use Show Cue System and connect the PC to our Express 48/96 using MIDI. I'd like to have at least 3 stereo outs.Any suggestions?
  4. D

    Floppy Emulator --> USB on Express or MC 24/48 consoles

    Has anyone tried this:USB Floppy Emulator http://www.ebay.com/itm/231089883601?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649My floppy is still good but how much longer.
  5. D

    ETC EosFamily Offline Editor

    No compatibility problems with old shows?Is the look different?
  6. D

    ETC EosFamily Offline Editor

    Can I still download the old version of the Element Offline editor?At the theater I am working at they have not upgrade the console beyond version 1.9
  7. D

    ETC Sensor rack low volt error

    David, Sorry it took so long to get back, but this show was cursed. We had an actress quit the Tuesday before our Friday opening so I was very busy, oh it is a six character show so she was a major character. Then I had a short vacation after opening. Yes it is a CEM+. Sensor 48 rack. I...
  8. D

    ETC Sensor rack low volt error

    Our Sensor 48 rack had a blip today. Half the dimmers in the rack were working and the blue beacon was flashing. The errors on the rack were: Phase C Volts Low Phase C Headroom Phase C Off The rack is powered from 240v split phase not three phase so there is not phase c. We usually...
  9. D

    Blue rondel to Gel number

    Just a quick question.What color gel will match the blue rondels in my altman border lights?Hoping for a quick answer.
  10. D

    Pool of water

    A local High School in my area did the show. I didn"t get to see it but I saw a video teaser for it. The pool was beautiful. The didn't have any leaks but, and this is a big but, they didn't take in to account that when the cast left the pool there would be water splashed on the stage. After...
  11. D

    Falling screen door

    We are doing 'On Golden Pond' and the screen door has to work then fall off the hinges. Any ideas?
  12. D

    Disney's Magic and Memories and You! show

    16 projectors wow. Next trip to the mouse (in June) I will be looking for the projectors. Thanks for the info.
  13. D

    The Cheap LED Round-Up

    Please please please get back to us when you start using the LED pars. We have the same height problem in our 99 seat community theatre, nine feet to the ceiling over the stage and an eight foot proscenium opening. Most LED fixtures have too narrow a beam and are too expensive. We want to...
  14. D

    Dimmer Doubling/120 volt devices (ETC/Sensor)

    They do have 750W/77V lamps. I purchased some from BulbAmerica. USHIO HPL 750w /77v halogen bulb
  15. D

    Control/Dimming Converting DMX to Micro-Plex

    I used a DMX-lator for years before we upgraded to a Sensor rack. Bought it on eBay. The owner even set it up special for me because I used it with old Sunn dimmer packs. We had a LMI touring rack that was DMX and 4 Sunn dimmer packs running from a Express 48/96. Worked great for years.
Back