Recent content by Erwin Redl

Thanks for pointing me at the DMX-RT4. Seems to have the same problems as the DMX-RT according to the lone Amazon review: "I ordered it and tested a simple program with some D/A DMX to 0-10V converters for pumps and some dmx rgb led lights. All worked as expected as well as a field test on...

Thank you for the recommendation. We decided to redesign the fixture and are down to a small splitter with only 4-6 ports. Nothing to write home about, at least no more DMX splitter bragging rights...

The installatiIt's actually 2 x 104 ports, each for different sites at an airport. I know, still A LOT of ports. We probably have redesign the custom DMX light fixture and data system to avoid a DMX-splitmageddon....

Thanks, Rob! That's a lovely piece of equipment. I have a couple of technical questions and will contact tech support after Labor Day. That's the best number, right? 866-617-3074 Cheers, Erwin

Hi there,I am looking for multiple units of UL or ETL certified DMX splitter with as many ports as possible, preferably with screw terminals and DIN rail. Any other US recognized certification would be fine as well. CE definitely not...There's an incredibly expensive high-end ETC Response...

Thx! Erwin

Thx! Erwin

Hi there,I am looking for small DMX player/recorder, preferably just a circuit board with screw terminals, and no housing. In the past I've used the Chauvet DJ DMX-RT and removed the housing but the quality of that product declined dramatically to a point where it is rendered useless. Same...

At least I am not the only one... Did you find an alternative, economic, and small DMX recorder/player? I've used the Swisson XCR-200 in the past but it is bigger and more expensive. Enttec also has similar...Thanks,Erwin

Hi there,I've been using several Chauvet DJ's DMX-RT devices without any problems for several years. I just bought two recently, and they are having problems to play back DMX light sequences correctly...Recording works, and I've set them to loop on startup. They loop once, twice, or several...

Hi there,I'd like to start experimenting with 16-bit DMX dimming of simple RGB-LED strips for a little art project.I usually use Nicolaudie products, e.g. ESA-PRO software with the SIUDI 7A/7B DMX interface. I found the following DMX encoder -...

There is absolutely no way someone could be harmed by these pendulums. They are all suspended overhead and can not make contact with anything no matter how hard they swing.

The overall vision is to have two 25 foot long (7.5m) pendulums that naturally swing from the ceiling of the theater. At the end of each pendulums there will be an RGBW LED rigged within a focusing mini flashlight. Building these pendulums as well as all of the wiring for the LED is easy and...

Hello- I am looking for a linear actuator that is DMX controllable. I am hoping to simply plug it into my 12V DMX driver V+ and V-. I am imagining that I can program it to go back and forth on one ID. (For example set at 0 the actuator is at the left and 255 it is all the way on the right. The...

Heya!After a lot of searching and testing trial versions of various software packages I bought the pro version of LumiDMX 3D. Works great and is very affordable - see www.lumidmx.com. Sirs Electronics, the American distributor they list, actually doesn't sell their products anymore. I ordered...