Recent content by ethanhk

  1. E

    Automated Fixtures Autoyoke problems

    So the iris limits were the problem for the iris, but we are still having problems with accuracy for their positioning.
  2. E

    Automated Fixtures Autoyoke problems

    Thank you, that sounds like the most probable issue, I'll go check that the next time I get a chance.
  3. E

    Automated Fixtures Autoyoke problems

    The fixture shows no error messages, and we have tried calibrating the iris at the fixture. The iris opens and closes properly when calibrating but closes up afterwards. Directly controlling the dmx address does not adjust the iris, and repatching the fixture does not work either.
  4. E

    Automated Fixtures Autoyoke problems

    Hi all,We have a bunch of City Theatrical Autoyokes on our FOH truss. One of our ML fixtures has its iris in all the way, and cannot be controlled from the board. The iris operates correctly during calibration, but after it is calibrated it goes to its closed position and stays there. We are...
  5. E

    Set up Mac usb to system for church playback

    I do not have experience with the d-pro software, but submasters seem like the way to go for setting up scenes for static intensity only looks. It may be a good idea to set moving light looks or palettes on the buttons, since setting non-intensity values on submasters may get a bit tricky.
  6. E

    Control/Dimming Creating and Running a light show through a computer

    If you have a computer nearby, you could try hooking up the element to the computer via a USB to midi cable, then send Midi Show Control commands to the console from something like Qlab.
  7. E

    Hi there!

    It is working well. The geometry and arena shape is something I have yet to wrap my head around yet, but there have been many successful shows and performances put on in the arena.
  8. E

    Hi there!

    I'm studying at Tufts University
  9. E

    Hi there!

    Hi controlbooth,I've been surfing for a while, but finally decided to introduce myself.I'm a 1st year college student, currently studying electrical engineering, but am very involved in lighting design and all aspects of theatre.
Back