Recent content by jamesh

Hi, when you select the unit (from the group window) and press locate, you should find control for it on your encoders inside either the position, colour or Beam window (opening these windows will put related position, colour or beam functions on your encoders). If you get stuck, send a copy of...

Good news - glad all sorted now!

Are the fixtures connected directly to the 5-pin DMX outputs of the console or running through any Network nodes?

With MagicQ you have a few ways of doing this, either A: Rec Remove. e.g. put dimmer in the programmer at any value, then Shift + Rec, Rec Remove (though as its a col palette you'll need to select the int filter also) and then select palette(s). Or B: view the palette, click the dimmer column...

What are the make/mode/mode of the fixtures you've used here? When you say 'all of my beams had dimmer values included in the color ranges' - are you talking using the default 10 col palettes we generate or have recorded some of your own? can remove attributes directly from any palette - if you...

Excellent! I'll be there for the duration of the show on the booth, hopefully see you there!

Was this one of the original style PC Wings or one of the Newer PC Wing Compacts? If you're at LDI and want to get in some time to have a look at the latest offerings from the ChamSys range we can arrange this also! :)

Hi All, Just to update you, there was a little bug where the negative monitor offsets where not working correctly in recent MagicQ versions. This is now fixed in the beta release v1.7.2.7.

You'll like need to change the following setting in MagicQ now on OSX systems only to use FTDI devices such as the Enttec Pro. Go to: Setup > View Settings > Ports > MagicQ Wings and Interfaces : change to 'VCP+FTDI Auto DMX'.If this doesn't sort it let me know.

Great, glad all working now. Any further questions do let me know.

What's the graphics card spec of your machine? If its a laptop on windows sometimes you have an option to run using either the inbuilt or high power graphics. If you create a desktop shotcut for MagicQ, then right click on the icon do you see an option for 'run with graphics processor' if so...

The PC Wing/Mini Wing does certainly unlock MagicQ from 'demo mode' which enables the following:• Execute Window full screen • Scheduled Events • iOS / Android Remote • Remote Control Protocol (serial, or network) • Web Server editing (viewing is supported) • Auto starting Playbacks • Playback...

With some control software yes... but the outputs of MagicQ are fully enabled with no time out, restriction or limit on the outputs at all. 64 universes output fully enabled without any hardware.

Actually all 64 universes of MagicQ are fully enabled for output - no hardware needed at all for this.Just download and install MagicQ and all 64 universes are fully enabled for output via Artnet, sACN and Pathport with no time restriction.If you need some of the advanced software control...

As Bryan mentioned above, for accurate timing (particularly over longer periods) we would suggest using internal timecode on the cue stack as this uses the system clock to time the execution of cues. MagicQ Fade/Delay timing on PC systems is subject to delays of your PC/Mac OS, which when taking...