Jay Ashworth's latest activity
-
Jay Ashworth reacted to themuzicman's post in the thread Telex 2 channel Wired and Wireless setup suggestions with
Like.
10 per channel, 20 total if split across channels.All of the AudioCom products have jumpers and DIP switches you can set to force... -
Jay Ashworth replied to the thread Telex 2 channel Wired and Wireless setup suggestions.We have 4 channels of BTR-800 in our blackbox com rack. It's not working these days, due to deferred maintenance, but it was hooked to...
-
Jay Ashworth reacted to Malabaristo's post in the thread Telex 2 channel Wired and Wireless setup suggestions with Like.
I believe the wired com connections on the BTR800 are configurable for either ClearCom or RTS, so what you have now makes sense if I...
-
Jay Ashworth reacted to Malabaristo's post in the thread Best practices as house when hosting touring production's lighting network with Like.
I don't necessarily disagree with this, but there's a very big difference between "Can I troubleshoot this?" and "Do I have time to...
-
Jay Ashworth reacted to danTt's post in the thread Best practices as house when hosting touring production's lighting network with Like.
You have a lot of really good points here.I'm going to address one aspect of it, with a potentially incendiary statement.If you're a...
-
Jay Ashworth reacted to ChrisB_SanDiego's post in the thread Best practices as house when hosting touring production's lighting network with Like.
You ask some interesting questions. I was a house tech for 15 years, now I do more design and consultation. On average, we had around...
-
Jay Ashworth reacted to Footer's post in the thread Best practices as house when hosting touring production's lighting network with Like.
I've spec'd an 8 port node at FOH in our new system just for this... and starting to ponder what that looks like. Good beginning of a...
-
This past year I was at the funural of a friend of mine and co-worker Ken Burns JR. Or JR as he was called in the touring industry...
-
Jay Ashworth reacted to bishopthomas's post in the thread Mackie 24/4 VLZ Pro Case Screws with Like.
If/when you get it open check the seating of the ribbon cables first. This is the number one suspect on Mackies. I had an SR32 with...
-
Jay Ashworth reacted to Ben Stiegler's post in the thread Recommendations for tool lanyards? with Like.
maybe explore whose liability insurance gets activated if/when a student does get beaned, then weigh the cost of the squid...
-
Jay Ashworth replied to the thread Alec Baldwin involved in accidental shooting death on set of "Rust".Well, specifically concerning the Crow, the direct fault was clear, it was Lee's mishandling of the pistol -=- maybe based on...
-
Jay Ashworth replied to the thread EOS firing OSC to Qlab - working, but inconsistently?.Those are the syntax of how you write the cue on the QLab side, then? Cause my guy who does that only ever writes the OSC...
-
Jay Ashworth replied to the thread Can I get 240V from ETC Sensor rack by combining 2 circuits?.It is if you're a Junior College, and they don't really *care* how the show looks. :-}Otherwise, you have to bake it into Capital...
-
Jay Ashworth replied to the thread EOS firing OSC to Qlab - working, but inconsistently?.Wait. EOS sends *11 OSC messages* on a GO?Also... oh, wait. I see. You send that filter command *in the OSC port*, and then EOS...
-
Jay Ashworth replied to the thread Multiverse transmitter issues.Yup. You should never do a firmware update over a wireless connection, unless you're sure the device is smart enough to put the file in...