Recent content by JimmyM

Off topic, but to be pedantic the CEM is either in the middle of the B phase in a SR48, and at the bottom the C phase in the SR24 and SR12.Also, in a 3-phase rack you're only ever going to have 208v, not 240v, not that there is a safe place to make that happen.

You may be able to use a ELV module with more sucess. This would allow Reverse Phase dimming. This is called out in the previously mentioned support article.

Check to make sure the console didn't lose it's IP address, it's pretty common for those consoles.To chnage it, exit out of Palette software and you should see a "network connections" program icon. Should be a 192.168.1.XXX IP usually, if it is 169.XXX.XXX.XXX it will not work(link local/DHCP).

Are your lights patched in Mosaic Designer to the correct Universe? If you use a program such as sACN View, do you see the output from the Mosaic?How are your triggers set up for the touch screen, if you use the built in WebUI to start a timeline/scene, does it work there?If you post some...

This sounds like tracking is on. It is a very powerful tool but can trip you up when trying to do this sort of thing.Heres a video talking about it, and a white paper from ETC:https://www.etcconnect.com/workarea/DownloadAsset.aspx?id=10737461850You can disable this in the setting and...

I would suggest reaching out to ETC, I have been having reports of multiple sites that had it working and it stopped recently, must be updates. I would also check that the pin is set correctly in the app.You can call ETC at 1800-688-4116 or if its not urgent, you can always send them an email...

If you go to the Paradigm processor you should be able to navigate to an "About" screen which should give information about the installer, and an ETC project number. Assuming the installer sent the files to ETC they should be able to provide documentation, and in the least case contact info for...

AFAIK Leviton can sell you new CC modules for an i96 still. Believe I had some on a job recently.

I've been really excited about this release for a while, can't wait to start using it.

Here’s the pin outs for the first connector in the top and bottom sections.

How is your console connected to the racks, DMX, network?

Make sure that you are using Tab 2 PSD(Playback Status Display) and not Tab 16 Cue List, which is like a groups or palettes tab rather than showing your progression through the cuelist.

You can totally do 4k with a single line using 6g or 12g, but I still agree with your point, fiber or net will be more useful in the long run.

I think a DFD Pre10 would be great solution for a simple architectural system.https://www.dfd.com/p10.html

I don’t think that is an airtight excuse…