Recent content by JoeSanborn

Dear museav,I would like to point out that our distributor in the US, Starin, has a NEW team of BEHRINGER reps. http://starin.biz/marketing/images/BehringerRep-Map-2013.pdfI hope this helps.Best Regards, Joe Sanborn Manager, Product Support MUSIC Group BEHRINGER

Dear Guys,Our level of product support is second-to-none.I have been with MUSIC Group for many years and manage a team of Product Specialists who are available to help you with any question related to the X32 and any BEHRINGER product-related questions. As Kyle indicated, I sent a Product...

Dear Rob,Yes this can be done, there are two steps. 1. You will need to setup the mix bus to be "Post EQ" (by default the first 8 mix buses are set this way to begin with so you can skip to step 2 if you are using those). You can do this by selecting a mix bus and viewing its "config" page in...

Dear Rob,You can connect the X32 directly to a computer using CAT5. Unless I need wireless I usually connect direct like this. If you use a wireless router you can also connect your computer with CAT5 to the an open port on the router. Just do not connect to the Yellow uplink jack. What is...

Dear Rob,No problem.I am not sure, given that the console is a B-Stock unit, if this has anything to do with the wobble/level. Shipping can be pretty rough sometimes, even though we double box and use custom foam inserts.I can say it will not have any effect on operation though.Best...

Dear Rob,Congrats on the new console arriving!To me this depends on the level of the individual channels. All DCA fader will do is add or subtract from that. So when DCAs are set at 0dB, then they aren't changing the level of the channels at all, making it a good place to start. Just...

Dear Rob,You can set your tap point for each Bus send to be Pre or Post EQ, and on each channel you can set if your EQ is pre or post Compressor. So for your application set your Monitor Bus Send to Pre EQ and you will be sending to the monitor Pre Compressor (as long as your channel is set to...

To save space see post below.Best Regards, Joe Sanborn Manager, Product Support MUSIC Group BEHRINGER

Dear Rob,No problem, hopefully we can get you up to speed on this stuff, it can be confusing.Buses: If you are only using your Buses to control levels of groups of channels, why waste any of your 16 Buses for this function? You will need your Buses for creating monitor mixes and feeding FX...

Dear Rob,1 - The router should be fine.2 - I believe you are looking at the Channel Bus Send page and Drew is talking about selecting the BUS Select and then clicking on the Sends tab which shows the Matrix Mixes which are feed by the Buses/SubGroups.3 - Yes.4 - Once you use DCAs you...

Dear Jeff,I just sent you my contact info. I will make sure we take care of this right away for you.Best Regards, Joe Sanborn Manager, Product Support MUSIC Group BEHRINGER

Dear Guys,Firmware 1.15 is now live on the X32 product page: Behringer: DIGITAL MIXER X321.15 improvements: - support for latest X32-Edit - 'select follows solo' function only selects a channel when solo is activated, not when deactivated - icon and name now copied when activating a channel...

Hi Guys, We have some X32 Webinars coming up for July.Webinar Schedule July 20137/9/2013 Tues 12PM PST X32 COMPACT - X32 Series In this Webinar, we will take you through the 4 latest additions to the X32 family. We will be focusing specifically on the newly released X32...

Dear Kevin,Joe Sanborn here with MUSIC Group.Please let me know if I can answer any questions.I agree with Brad that you may want to download our XiControl software or our XControl really gives you a feel for the console and runs on Mac, Windows and Linux. If you have an iPad check out the...

Hi Guys,We have started a new Tech Talk Series on the BEHRINGER forum. We will be covering any hot topics we are getting questions about.The S16 Digital Snake has been shipping for the past few months and we have noticed an increase in the number of setup questions. The first Tech Talk...