Recent content by jordandare

SSRC was the distro manufacturer.Without revealing too much(as if my username doesn't!), I work in the technology department while being a student, so while the theater isn't my primary area, I do get paid 3x overtime when they need someone to watch over it :).I also work on the Low Voltage...

I believe it's 3x575W, but not entirely sure. There's 3 lines coming out of it with a 4th empty clamp for another cable.I believe the full statement was something along the lines of "It looks safe but it's beyond my skillset to repair" from facilities.I checked the dimmer and all the...

I'd say the terminal access is about... maybe foot and a half from the S4 MultiPar.I'm going to push for facilities to fix this but I'll need to come up with reasons for it to be fixed besides the fact we have a dark spot on our cyc. They declared it "safe" as far as I know, whatever that means.

Some cyc lines have been dead for a few years.Curiosity got the better of me, decided to pop open terminal access(power was cut to the electric before opening and verified to be off), was greeted with this surprise:How the hell would this have happened? Apparently it's been like this...

Probably going to have contractors yank out all the wiring and replace it with new. Or just run new myself since it's just cat5e. Old wiring is a disaster.How are the touch screens? Going to see if they can give us a demo but first-hand experience from others would be nice before we drop...

Anyone have experience with Strand's Vision.Net system?Specifically looking into the touchscreens.Going to replace our old Premiere system with Vision.Net and wanting to know what experience people have with the system.

Another thing I would do is create a diagram of how you have things setup. That might help with troubleshooting if you can logically follow it with a diagram. Here's an example of ours:

After looking at the manual, I'm betting a panic input was tripped by something (you said they cut the power at some point) might be from cutting the power, might be an emergency lighting system.It could also be a power-up preset, but the preset would be overridden by DMX/PathPort input as far...

Yup, I also have a backup of the configuration file.

Having problems after repairing our old Premiere Control System from Strand.Resistor got destroyed on the processor itself, so we unplugged it. Unfortunately left it unplugged for too long and it lost the existing config.Disk drive power supply voltage adjuster was destroyed while attempting...