Recent content by kokofi

Bill i'm a little iffy on that fixture, have you personally used it and could you provide any extra info on it?

The spill is the bleed, the field light, it's what is not EXACTLY on the line with the image. And thank you jo for pointing out the beam angle, if I put the projector maximum distance away that will give me a 5' 6" size vs the original 3' 6". Would you recommend any other alternatives?

Hello ControlBooth In a case for a piece of (more or less) architectural lighting I need to project a companies logo onto the wall, the problem is that they want to run it all business hours and they want NO spill on the logo. The distance is about 10ft~15ft. Originally they were using a Src 4...

Now what about the Celtic Cloth? it's IFR as well and plenty wide

So I've been looking at splats for some time now. And they look very fun and I would like to play with them. The problem is that I don't have access to any, nor do I have money enough to buy the bigger ones. What I keep seeing is that they are in fact spandex based. Would it be possible to just...

So I'm not exactly a new member, just never really introduced myself to the community. Well HELLO THERE CONTROL BOOTH! I'm a techie started in theatre and am now more than obsessed with anything concerning AVL. I've done around 15 some productions and plan on doing many more. Living in the...

While the mic was off you had a reading for about 2 on the receiver, when the mic was on the level jumped to say 3-4. Also I never saw an indication for the antenna a or b for strength. And if I were you I would try a frequency with less noise on it. Being in the US there are codes about...

If you do have the orange lights that means your reciever is connecting to SOMETHING, now I'm not repeating the other posts, yes check for interference, but once you're done, now check to see that your cables are not the problem. It sounds like even if the transmitter is transmitting then it...

Plain and simple question is if there is a better way to mic an actress with an E6 from country man, the problem is that the mic is already set to be a temple mount and the boom is going way to far down her cheek. For now what I've done is simply (and most likely inappropriately) snaked the mic...