Recent content by lakota651

Under the Audio Preferences, you should be seeing "Edit Patch" next to the "Audio Patch". Select the one that's next to Fire Studio (which should be set on "Audio Patch 1" to make things easier as you program) and you'll be able to assign the hardware outputs to the QLab outputs as you see fit...

Hi Ryan,The outputs in the software correspond to the channels on the board. That's means if you are routing to the left channel in QLab to Studio Live Output 1, it will be going to channel 1 on the console. If you want that output to be on channel 23, you would need to patch that signal to...

Wags,What bands are your units in? Also, are you aware of the advance tuning function/mode for the ULX systems? It's bit of pain because you need the supplemental guides to decipher the alphanumeric display, but it will allow you to maximize the use of your current setup, for what it's worth...

Footer is partially correct. However DPA is the only manufacture that makes a Sennheiser G3 compatible capsule outside of Sennheiser themselves that I am aware of. Heil, and others like Earthworks, only make capsules for Shure, Lectrosonics, and others that use the 3 ring model. Rat Sound is...

Yep, just screw it on. It holds really well. I forget if the G3s do this, but the 2000 series auto mutes so you can hot swap them if you so choose. It also identifies the capsule. But like Footer suggested, try swapping capsules with another unit if you can just to be sure.If you have the...

Hi Wags,Have you also taken into consideration where your interfering signals are coming from? You might find you actually have your helicals aimed at those sources. Here in Phoenix it's fairly safe practice to have them placed between your stage and South Mountain, with the greatest point of...

Take a look at these. I've never used them so I can't comment as to how well they work, but they look like they could work for you. The fixed camera is about $400, the PTZ is about $1000.GV-LS2/GV-LS1 | JVC JVC JVC GV-LS1 Live Streaming Camera GV-LS1BUS B&H Photo Video JVC JVC GV-LS2 Live...

Oh, and what about Audio; do you need it? Will you be using the TV speakers or is audio coming from another source? I ask because latency might become an issue.

What type of signal output do you have? RGB, HDMI, HD-SDI, etc?Is the TV in another room? How many walls does the signal have to go through.Does it have to be wifi/ go through the computer?Depending on your answers, Gefen makes a few products to stream direct to a TV. Gefen, LLC - UltraHD...

Hi Andrew,Is your booth sealed or does it have an open window? I believe that those monitors only have on board EQ, so if you are wanting to time align them to the house PA you'll need an additional processor. Do you have a system processor, and are there any available outputs?~ Lakota

It sounds like you might have a couple of problems going on, so let's start with your setup.How many of each model are using? Are all like models in the same frequency range? And what are they? Are you using any antenna combiners and paddles or just the whips on the back of each unit? Are the...

What are the connectors you are referring to? TS, NL2, NL4? How long of runs? What's the maximum amount of watts you could be sending down them?

Hi Matt,Start by looking at these interfaces. After you find one that looks good to you; check Craigslist if used is an option. Though, be sure to test it before money changes hands.Presonus Audiobox 1818 M-Audio M-Track Eight, Profire610, Profire2626 Focusrite Scarlett 18i6, Scarlett 18i20...

Hi Ryan,You're not really going to know until you open it up. I'm thinking along the lines of a short in the connecting ribbon cable or master board (I'm not sure what's exactly inside this model) A quick google search also suggests an issue with the power supplies.Congrats on the new desk!

A friend of mine has the 610 and seems to like it well enough. He uses it for personal recordings at home. Personally I have its big brother, the Profire 2626, and I quite like it. It runs on the same software, and I find it works well with everything I have tried it with on my mac. Audio...