Les

Les

Well-Known Member From DFW, Tx.
Joined
Last seen
Viewing thread My Lighting System
Messages
4,232
Wiki contributions
61
Reaction score
1,154
Points
152

Latest activityPostingsAbout

    • Les
      Les reacted to brucek's post in the thread My Lighting System with Like Like.
      The big issues you will run into with an old ENR rack are bad AirFlow sensors on the processor (not a cheap component to replace) and...
    • Les
      Les reacted to derekleffew's post in the thread C-clamp part needed with Like Like.
      One important note: The hole in an ETC c-clamp is slightly smaller in diameter, thus will not take an Altman stud or 1/2" ID pipe...
    • Les
      Les reacted to gafftaper's post in the thread C-clamp part needed with Like Like.
      @Matthew Peters bonus points to you from the CB staff. This is exactly how we like people who represent companies to act on CB. You...
    • Les
      Les reacted to aeh20s's post in the thread Martin Sues ETC for Patent Infringement with Like Like.
      Just the wording in the lawsuit that presumes Martin lost sales to ETC because of similar handles on the yoke and not because of a...
    • Les
      Les reacted to Matthew Peters's post in the thread C-clamp part needed with Like Like.
      If you are looking for the 510 C-Clamp Center Stud piece the part number is 23-0001 and we have some in stock. If you have any other...
    • Les
      Les replied to the thread C-clamp part needed.
      Spigot, possibly? You could try calling Altman, assuming I have the type correct. As far as I know, the spigots are pretty much...
      • cclamp.png
    • Les
      Les reacted to egilson1's post in the thread Another attack in a theatre - Keeps happening again. Can we do anything? with Like Like.
      FYI there is an automated filter for foul language. So it’s not necessarily that a moderator censored a post specifically but rather the...
    • Les
      Les replied to the thread LYCIAN 927 Ballast Wiring.
      Also voicing my support in calling Lycian. I needed a minor part for a probably long-discontinued spot and I found them to be...
    • Les
      Les replied to the thread Flaking paint on S4 reflector housing.
      I have seen this happen but it has never posed an issue for me. The fixtures are cast aluminum so while they can theoretically corrode...
    • Les
      Les replied to the thread "Other duties as assigned".
      I understand the desire for auto- toilets and sinks in K-12 educational facilities. With some kids, anything that can be left on, open...
    • Les
      Les reacted to cbrandt's post in the thread "Other duties as assigned" with Like Like.
      It seems that a lot of facilities move towards these for cleanliness. Not because people are getting sick from touching surfaces, but...
    • Les
      Les replied to the thread Is buying used moving light fixtures worth it?.
      FBET ERR I believe is an issue with the motor driver chip(s), but could also possibly be an obstruction or problem with the optical...
    • Les
      Les reacted to jon.hole's post in the thread FLX S48 vs. FLX vs. Colorsource AV40 control console with Like Like.
      Hi @Gpquinn , I'm from Vari-Lite, who manufacture the FLX range.Of the three consoles you mentioned, FLX S48 is most closely...
    • Les
      Les replied to the thread Painting FOH Bulbs.
      Years ago I visited a convention center with what appeared to be a 50/50 mixture of Metal Halide and HPS fixtures, laid out in a grid...
    • Les
      Les reacted to almorton's post in the thread SHEHDS fixtures -- any good? with Like Like.
      Context is all. I'd interpret strike the lamp as make it light - lamp on.I'd interpret strike the revolver as remove the revolver from...
    Show older items
  • Loading…
  • Loading…
Back