Recent content by Lsly

  1. L

    Bus power from a venue

    Thanks everyone. Much of the answers go along with my research and are much appreciated.
  2. L

    Bus power from a venue

    Hello all,I'm wondering what guidelines there might be for installing bus power for a venue to the bus. We have always just provided a 50amp 250v 3 wire plus ground service. Now engineers are wanting GFCIs. This of course goes against what many of us understand about RVs and Busses and their...
  3. L

    NEC 2020 Proposals-Public Comment thru August 30

    So what does protected applications mean? I'm assuming its, supported on a pipe or in a set unit and such. And maybe avoid the floor, as per usual.Thanks Steve for your work on this.
  4. L

    Super Trouper Flicker Problem.

    You said the lamps were replaced last year! Duty cycle is about 2000 hours. I average just over 12 months before we need new lamps. Can't remember, do you need to rotate every 500 hours on those? You do on Lycians, and if you don't rotate it will cause this issue.Cheers
  5. L

    Please check out...

    Any interesting LED architectural fixtures? Think conversion........Cheers Lorin Sly
  6. L

    LDI?

    Thanks for the heads up!
  7. L

    LDI?

    No thread on LDI yet? Looking for any info on new LED architectural fixturesThanks Lorin Sly
  8. L

    Kreios FLX Power Supply Issues

    I have 24 plus of these and not had an issue at all. Quite simply the best LED work light I have seen to date. But as you know, things happen, electric eels most likely. Cheers!Lorin Sly
  9. L

    Can you say LED worklight?

    Yup yup! Very happy. Gel frame is nice!
  10. L

    OSRAM KREIOS FLx 90W NOW IN STOCK

    Nice! However I keep getting 404 errors when i try to see the info on the site. @DELO72 way to stick with it!LS
  11. L

    Can you say LED worklight?

    Oh you mean IEC. OK I get it now. I prefer a hard wired tail myself. Never really liked the separate tail. Just needs to be 24-36" minimum.
  12. L

    Can you say LED worklight?

    Yup bale is different. Odd, but I'm sure our Osram member will be along in a minute or two.
  13. L

    Can you say LED worklight?

    Not sure but it looks like maybe he got a bad bale. This is a Altman style clamp. Standard 1/2 bolt. No washer needed.Also had an ETC on there to check, it was the same. Maybe that spud is smaller than normal. I'm wondering what is came off?
  14. L

    Opti Splitter

    Anyone that says Fleenor on it. Others are good but I can say I have never had an issue with a Fleenor product, ever. Worth the money.
Back