macsound's latest activity
-
macsound reacted to RonaldBeal's post in the thread Martin Sues ETC for Patent Infringement with
Like.
PRG Bad Boy has similar handles, and was introduced a few months before the Mac III... prior art? -
macsound reacted to theatricalmatt's post in the thread Martin Sues ETC for Patent Infringement with Like.
I'm kind of surprised the handles were patentable to begin with. I'm sure outside the field of moving lights there would be plenty of...
-
Speakers look like Innovox but could be something else. Probably weren't torqued down adequately the first time and vibrated loose...
-
This strikes me as a "defend your patent or lose it" lawsuit.
-
macsound replied to the thread I-Cue, PATCHING PAN AND TILT.My assumption was that one of those XLRs went through the birdsnest of cable and someone had clipped the other end in an attempt to...
-
Sorry, I thought it was the most obvious one based on what you could see in the picture: nothing plugged into the input port, therefore...
-
So you're not going to tell us what the problem was?? Possible solutions from the picture.... Nothing plugged into the Input port...
-
Sorry to hear that theater is being taught by an unprepared instructor. You all deserve better.I realize this is all very...
-
From my perch on the Roost of Curmudgeonly Observers:I am perplexed as to what failure of instruction and/or education has led to a...
-
Port 2 is where the DMX cable is plugged in on the back of the express - there's port 1(usually where the cable to the dimmers is...
-
All good my friend. I'll go out on a limb and say that everybody here on Control Booth has been where you are. OK, so let's go through...
-
macsound replied to the thread Martin Sues ETC for Patent Infringement.I mean, they're paid by the hour right? No one is going to just copy-paste all that legalese. Gotta hand type it again. Wrack up those...
-
macsound reacted to kenact's post in the thread Wireless mic issues only when there's an audience in the space? with Like.
Most installations I've seen, have the receivers near the stage, with a snake connecting them to the booth. The greater the distance...
-
The system is a conversion from a dual 20a dimmer system, replacing some modules with relay modules and swapping the fixture end to...
-
There is a lot of information missing here. Are you assuming a full 40a per module? Are you also assuming that these fixtures all have...