As I do not have many dmx lights, only 3, could I just use a dmx splitter cable instead of an opto splitter. This means one side would be for the stage lighting, not dmx and one would be for the dmx lights.
Yes ok.
The dimmer pack shown on the picture. It says it is a Betapack 2 made by Zero 88, same as the lighting board. I'm not sure what the actual name for it is, but you have the stage light number above and you plug them in accordingly, to give power and to patch them.Yes the stage lights...
Ok, so I buy a splitter box and attach them all to them 5 pins?However, would I work if I plugged the DMX 3 pin into a 5 pin adapter and then put it into the bottom of the daisy chained dimmer packs?The cable goes in the bottom dimmer pack hole and goes to the lighting board? Will this work...
Basically, at our school we have stage lights connected using 3 rounded plug switches to a dimmer backstage. This then goes through a 5 pin to the stage box at the back of the hall which then goes into the jester lighting board as a 5 pin dmx. However we also have some other dmx lights such as a...