Recent content by msawyer52

ETC recommends checking the contacts on the back of the CEM for corrosion and try to clean if necessary. Haven't been back in the facility since the issue.

Even without data, shouldn't I get a power light?

What issues are the firmware causing?

Working with a HS with a sensor+ 96 rack. Last year converted over to all LED fixtures. Third electric is not functioning. Third electric relay in the rack shows no lights on the signal or power. Reset the breaker switch has no effect. Swapped in a known good relay. Shows no lights for signal...

As usual there is limited to no budget for replacement. Was hoping we could minimize the look. Will just have to live with it and put it up for replacement in the future budgets. Thanks

Is there anyway to repair the damaged cyc? Someone got something on the cyc and they tried to clean it off. The color/fire retardant has been damaged. Looks like an alien standing behind the cyc. Any suggestions or do we have to bite the bullet and replace it?

Last ditch choice, try these. https://www.ebay.com/p/108241069

We're running an original element console.

I'm looking for recommendations for patching of a high school ETC Element console. We've just converted all of our conventional fixtures to LED. Previously we were patched to an ETC 48 Sensor rack at 1:1 which left the console faders in a less desirable configuration. It worked but was not the...

Probably similar to the hpl575 lamp but the color saturation was not as good as the new color source fixtures we installed.

We had a demo of the Source 4wrds color. Terrible white rendering. That unit could only be used for color mixing. The regular Source 4wrd as you said has a slight pink hue but 100% better that the color unit.

Just had everything installed this week. Next up is Beauty and the beast end of March. Hoping this goes well with a new facility manager. I won't be working on the show.

Thanks, looking at doing about the same, just don't have the budget for a gazillion! Have you used any of the source4wrd color units? Haven't found much except that the white is no a good rendition.

Have talked to Randy at your company, might need the demo to see for ourselves. Just trying to get more opinions here.

Upgrading a HS theater lighting system. Upgrading from Source Four w/750XL long life lamps. Looking at the 4WRD Color or 4WRD White to upgrade the current fixtures. Also adding some ColorSource Spot to the inventory. Any comments, comparisons and or recommendations appreciated. Thanks