Recent content by oak1now

hey guys i have a cem brain that i just got because my old one the screen went out. the problem im having is that the new brain was configured with a 96ch dimmer that was a permanent install. Now i want to use it on my 48ch touring dimmer rack. The new brain was set up using etc link and not a...

Thanks Tim that did the trick. Still wondering why that happen ?

Hey guys i have a old hog 500 that i was gonna do a permanent install for and I ran into a problem. I havent used it in a few months but when i decided to pull it out and patch some fixtures for some reason my number keypad is acting up. when patching if i press the number 1 i get output 11 ...

i was able to fix my 12ch dimmers but i just had to do the same thing on a new 24 channel etc sensor rack w/ a emp brain. its channels 11-12 only did the test pattern of 830 and also 820 and the same thing happen after it reaches 1% it goes to full any suggestions ???

the 2 channels are pretty much on/off bring it up to 1% and it goes to 100% i have used other consoles from a m1 to hog ipc and hog3 and have had the same issue. I am using dmx. I bought the dimmer used and have always had that problem. I haven't had time to the test but as soon as i do i will...

i have an old brain the mpe so its just the 3 dials and when i swaped out cards it stays on the same port and doesnt go with the card. Same thing when i swaped out the mpe. I am using a lep 624 which i dont think it can be the problem but you guys let me know thanks

hey guys so im having a problem with a 24 ch etc sensor rack i have one channel that is on or off only no dimming at all. i have swapped out dimmer cards and main brain but still have problem with just one channel any suggestions ? i have take all cards and brain out cleaned it and now i have...