Recent content by Oliver B

  1. O

    Chauvet Hurricane Haze 2D Issues

    We also use one of these, and I wouldn't get one again! Started leaking within months of purchase. I will say that it was covered under warranty, and it was fixed with no issues.
  2. O

    Qlab "go" delay

    Thanks! I figured that out after I posted, but that didn't solve the problem. Of course as I write this reply I'm not at the theatre anymore (show is open, I'm on to the next gig!) but there was some "preview" setting that I unclicked that seemed to solve the problem.
  3. O

    Qlab "go" delay

    I know this is an old topic, but I'm experiencing the same issues. The first 15 cues or so will trigger immediately, but as the show continues, the triggering gets slower and slower. I'm using wav files, and I'm preloading all the cues. What I've noticed is there is a delay from hitting the...
  4. O

    Chauvet Hurricane Hazer Sound Management

    Well, now in addition to it being fluid hungry, it's also sprung a leak (and it's 8 months old!) Using beamsplitter has definitely cut down on usage (I've only gone through one gallon of haze fluid during 33 performances), but I'll definitely be looking at getting a different machine in the near...
  5. O

    Chauvet Hurricane Hazer Sound Management

    It's hard to tell. I think the Hurricane 2D uses a LOT of fluid, and mine just developed a leak. I have found that this hazer is not nearly as good as some units I've used in the past.That being said, I will check the level tomorrow, and try and figure out how much I've used in the past two days.
  6. O

    Chauvet Hurricane Hazer Sound Management

    I can get it pretty dense. We just finished final dress for "Grease" which opens tomorrow night. Show came down 5 minutes ago, front door has been wide open, and there is still a pretty good layer of haze hanging in the air.
  7. O

    Chauvet Hurricane Hazer Sound Management

    I'm having trouble getting beamsplitter to hang long enough, but the theatre is really drafty, and yesterday during tech the HVAC was running almost constantly!
  8. O

    Chauvet Hurricane Hazer Sound Management

    I use the Hurricane 2D all the time. I don't think building a box around it will really solve your problem, because you still need to leave enough room for air intake for the fan, and haze output. Are you using Chauvet haze fluid? I found that their haze formulation only hangs for a minute or...
  9. O

    ADJ Fog Fury Jett LED control

    That's good to know. I just grilled a rep from Chauvet today on the phone for 20 minutes! Looks like I'll be swapping out for the Geyser.
  10. O

    ADJ Fog Fury Jett LED control

    Thanks Phil!I ultimately decided to return the units because after numerous discussions with ADJ, it was nothing I was doing wrong, it's actually a mistake in their manual. So, I'm shopping for a unit that will allow separate control of the LEDs and fog.I will say that Guy at ADJ was very...
  11. O

    ADJ Fog Fury Jett LED control

    whoops. I misspoke in my last post (it was a long day at work!). I tried 100% (255) and 0% (0). I can't imagine that a generic channel on magic q would output anything other than 0-255, but I will do some research on that.
  12. O

    ADJ Fog Fury Jett LED control

    I didn't try specific values for channel 7 other than full (512) or off (0). I'm using MagicQ PC...I set up seven generic channels to control the unit (since it wasn't in the library I have installed).
  13. O

    ADJ Fog Fury Jett LED control

    Yup...tried that...no LED output unless I also add fog.
  14. O

    ADJ Fog Fury Jett LED control

    I tried 7 channel and 5 channel DMX modes. I'm able to do color fades/strobes/master fades, but only when producing fog.
  15. O

    ADJ Fog Fury Jett LED control

    Hi everyone,I just picked up two Fog Fury Jett vertical foggers from ADJ. I was looking for a fogger with built in LEDs that I could use as truss warmers even when not producing fog.I just set one up, and despite my best efforts, I cannot get the LEDs to illuminate unless I'm producing fog...
Back