Recent content by pasjTECH

Hi, thanks for your response! Yes I totally agree with you normally I would focus R119 to a hard edge, but in this instance we are not worried about spill at all. I think I might end up trying out the R114 as you suggested to see if that helps.

Thanks for your response! Unfortunately we can't increase the wattage because we are already using 750w lamps, although the dimmers can take 500w more. Also, we are using 36 degree barrels.

I'd like to get some lighting design ideas to help solve a problem. Essentially, we have swapped some old PARs out for S4 Ellipsoidals and moved the position of the electric about 15ft farther back from the stage. Since we are trying to recreate the front wash we had with the old PARs we had to...

Thanks for your help! I checked out the macro and the cue. And by themselves they look fine and they both are working as they should. It turns out that there isn't a link in that cue before the blackout (nor is there a link in the blackout cue) because there is not supposed to be the chase...

Yes, it's a 125 Express. I'm not the original designer for this show, I'm just one of the board ops. I've never seen a show programmed like this before. I believe it is actually a Link to a Macro (under Link it says "M12") in the cue before the blackout cue. I've never seen a cue linked to a...

Hi, our ETC 125 is having some problems with macros. Basically a macro chase sequence keeps going during a blackout. The chase begins in the cue before and is programmed to go out with the blackout. However, every once in a while the chase will keep going while everything else will blackout...