Recent content by pcardwelll

  1. P

    Pls Help! ETC Dimmer Rack going out!

    awesome, thank you!
  2. P

    Pls Help! ETC Dimmer Rack going out!

    okay i’m going to try to answer these as best i can! :)it was a reboot and an examination along with setting some of our settings as masters on the panelsif by controller you mean a lighting board, then yes. we do.the lights that are coming on are totally fine. no flickering or anything...
  3. P

    Pls Help! ETC Dimmer Rack going out!

    Thank you so much! If i’ve already done these steps, what other actions would you recommend?
  4. P

    Pls Help! ETC Dimmer Rack going out!

    Hey guys, new LD/Engineer here!At my place of work, we have a dimmer rack from ETC (pictures below) and w recently had some work done on it. Soon after, we had some conventional lights on all Electrics go out. Upon researching more of our dimmer snakes and boxes, I found that a lot of them...
  5. P

    Learning How to Patch

    thank you so so much! i appreciate it
  6. P

    Learning How to Patch

    alrighty, thanks
  7. P

    Learning How to Patch

    Sorry for all the post but it is a 5 pin DMX being daisy-chained throughout a rail of lights. And each individual light is connected to power and the power goes into a Dimmer
  8. P

    Learning How to Patch

    Okay so Turning the Lamp ON/OFF is On, Lamp State is On, Off Via DMX is Yes, On if DMX is On, On, Off if DMX is Off, On,
  9. P

    Learning How to Patch

    I just found the manual of how to turn them on! Let me go look!
  10. P

    Learning How to Patch

    I'm gonna be honest I'm brand new to this so I don't know how to check that. The dimmer is 100% open on the console if that's what you mean. And I just checked, the lights are connected to power which is then connected to a dimmer. ...I know these aren't supposed to be connected to a dimmer and...
  11. P

    Learning How to Patch

    not outputting light, 2/4 of them aren't
  12. P

    Learning How to Patch

    Hello, thank you for your input. They are the Chavet Rogue Outcast Hybrid 1's, and they are all on 25 channel mode. Two out of 4 of them are on. In my console, I have them all on 25 channel as well. The patching from the dimmers goes like this; 2.100 2.126 2.152 2.177I'm using someone else's...
  13. P

    Learning How to Patch

    Hye guys! I'm using a GMA2 board and trying to patch in some Rogues, washes/spots,etc. I am patching the numbers in correctly but nothing is coming on. Do other lights need to be programmed first, such as dimmers with colors? Any suggestions? Thanks!
Back