Hi folks, I need to make a 5 to 4 pin DMX adapter. Anyone have a diagram? I purchases an City Theatrical DMXCat to figure out some issues I was having and the unit is only 5 pin. That is great for my ETC LED's but not so good for a lot of DMX accessories, like iCues and DMX Irises.
Thought I would jump in to this older post of mine. I have replaced bases on my Fresnel stock. The problem is simply in the old days the spring contact was a flat surface. The newer ones are concave. The lamp contact points don't always have the mass to completely make good contact. An...
Some answers to your questions:
Wattage is 1K
Going through lamps like they were water
Wire I am using is BNTECHGO 12 Gauge Silicone Wire
I have to modify my connectors to fit in the sockets
The Grainger info is: Bryant Electric R13742 A; item #46587835
I'll try and get photos soon.
Hi all, I have about 30 Strand 6" Fresnelites that I have been replacing bases on more frequently than I think necessary. The problem appears to be arcing with carbon build up between the bottom of the lamp base and the spring loaded connector in the base. I have tried different brands of...