Recent content by PDSaccman

That makes sense. Thanks!

I have been noticing on Broadway shows particularly Phantom, that there is a small screen with five or so faders beneath it that sits right next to the console. Does anyone know what this is?

I'm doing SDI. How do I get 8 outputs? Is this something that is uncommon to do?Thanks for your help

Is there a device out there that would allow be to take a digital signal (like thunderbolt) and distritube it across 8 different bnc monitors? Basically, I have a couple of CRTs in a show Im doing that need to all have a different videos on them that all comes from the same computer. I plan to...

We currently have one 2010 Mac Pro, but are planning to get another one. I am not sure about the resolution, but probably pretty high.

For our upcoming show, we are using 4 projectors, A front, a rear, and two sides. What would be the best hardware/software to accomplish this. We would like to be able to have all the projectors come from one computer and be able to project different things all at once. We currently have a mac...

That's where they are now, but we would like to have them in our booth instead.

Hello, I am looking to move around my wireless racks. We have audio technica wireless mics. I was looking at cable (I need about 100ft). Do I need this? http://www.bhphotovideo.com/c/product/352367-REG/Audio_Technica_AC100_AC100_BNC_to_BNC.htmlor will this work...

Thanks, but it still doesn't work.

Hello, I am trying to setup the xuf card on the x32. My plan is to have 8 channels coming from the computer into the board over USB ouput to different busses. I have setup the card to be 8in/32 out and delegated a block of 8 channels (25-32) to be card 25-32. Each individual channel is also...

So our lighting designer made us these custom "boxes" for our grid. They are basically a multi cable running into a metal box with c-clamps and for plugs. We place them on electrics. So yesterday during a crewe call, one of the plugs was not working. So we used a gam check and it said there was...

Ok thanks.The amp model is a crown power line 1.

so should we try to use a trs cable instead of a ts going from the amp to the eq? And again, I will try to get to the model amp that we have. It's weird all of our other speakers are on three mackie amps, but these monitors are on a completely different one.

Again, I can find out tomorrow when Im at school. I dont know if this helps, but the speaker wire on the amp end is just bare wire wrapped around banana plugs. It has a speakon connection in the back and we happen to have extra speakon lying around should we try replacing the cable?

The eq is in a rack with all the amps backstage. As for the cable the way it works know is there is an 1/4 inch cable coming out of the amp and into the output on the eq. I believe this cable is just TS not trs. Then the input on that is an xlr coming from a snake which goes to the board. In the...