Recent content by rmarsh

Those are like the sort of controllers I was looking at. I never ended up actually doing this project since all the fiberglass scenery got cut from the show (Oh well). I still really want to play with LED strips sometime though so hopefully some other show will come up that gives me an excuse to...

That's a good bit like what we're doing. I'm thinking I may go for the more expensive tape since it looks like higher density LEDs on the strip will blend better.I'm using an Ion to control and by 2-3 channels I actually meant 2-3 grouping of RGB. I've already gotten used to the Ion way of...

Hi all,I have a design project I'd love to hear your thoughts on. We're building these fiberglass waves that vary in height from ~4" to 1'. They'll be sitting on the floor and I want to light them up with LEDs. The one instrument I know that could fit under the smallest ones are Astera...

About fan noise, yes you hear them in the theater but it's not bad. We generally do plays (not musicals) with no mics and don't mind the little bit of noise. They are quieter than the fans on most scrollers I've worked with.About MS Lighting, we bought 12 of these units and they sent us a lot...

Hi all,Sorry I haven't been back to this thread for a long time or posted the end to this story. Here's some updates.Slowing the DMX speed completely stopped the flickering problem. We also changed the profile (It's a profile created by LDs and myself at the theater, not from ETC) so their...

I think the DMX timing is it! I changed it on the port with the one I'm testing fom maximum to slow, and now that ones not flashing anymore. I just need to figure out how to change it for the right of the lights. We are using ETC Gateways: a LAN cable plugs the board into the system, and each...

This is a whole new building with new board, cabling, etc. Our conventionals and other LEDs are working fine though, so I don't think that the board/cables would be the problem. I haven't bothered to terminate these. They are 3-pin and I don't have extra 3-pin plugs lying around at the moment...

The theater I work at got a bunch of LED Moving Heads from MS Lighting for this season. Out of the box they seemed great, really bright and lots of colors, but we're having a few problems.1. When you move them they will sometimes flash. If the intensity is at zero they flash in some random...

Has anyone used the Maxremote app? I recently started using it with a maxxyz compact. Setup was easy, but it is not showing all my cuelists. There's three " playback pages" and what cuelists are in which page seems to be random compared to how I have the actual board laid out. It's annoying...