Recent content by RoryG6

The booth is locked. we still however want to limit access further. Plus there is a sliding glass window that removes the security of the room as it has no lock on it!I think the only thing that we can use to get round this is a key switch with the socket under the desk.We really only want...

We are looking to find a way to password protect our ETC Element lighting board as a way to limit unauthorised access. Is there a way to do this so that it will ask for a password on start up?Would putting a key socket in to control the power to the board be an option? Providing that the...

yes the fixture power is coming off of some kind of dimmer, they are powered on and off from the board through a dmx address its not that thats the issue though its the fact that changing the cable from the dmx matrix didn't work.

We tried changing the cables. our only issue was changing the dmx in to the fixture. the setup has dmx in then dmx out going to a dimmer controller that powers the fixture. the dmx line that goes to the fixture is a 10 meter cable that goes from a bar in the position that the fixture was...

Thanks both, I'll try have a look tomorrow, I don't think we have what the menue settings should be (I wasn't involved in setup sadly) I also don't think it's a power issue as they seem to be capible of panning and tilting during these phases. I did wonder about the cables as this has only...

hi, I use an ect element lighting board at my school and we have 2 Chauvet Rogue R2 fixtures that we are having issues with. The main one being a loss of beam and strobing. After power on the lights may take time to recognise that they are turned on and will often strobe for no reason or go...