Recent content by Scott S

Thanks for the info, I am comfortable working with these voltages I started a month ago with only 3 channels total working out of 12 each box being 6 channels, at this point there has been bad wires, cut wires, dirty contacts on cards and now i have only 3 channels that don't work, I still have...

That is correct, i have 1 card that i put in a couple working channels and the lights worked but dim, that is the picture of the card

Is there a different breaker that can be used

here are some pictures of card that seems to be at half power and a breaker

i agree with the breaker and I put it in the box just for testing and I’m trying to find replacements. I will open the breaker back up and take a picture and post that also Now the fuses did not make sense when I first saw them, a 50 amp when there is a breaker in-line that’s a 20 amp. I have 2...

I will take some pictures tomorrow and post them

Will do thanks for the info

yes the 10th dimmer is working and I know it was the breaker but I did go through all the cards and cleaned them up I do have one card that when I plugged it in a good channel it was dim like the light was only getting half the power one thing that I don't understand is the breaker was...

UPDATE: Did some work on the boxes today and some minor testing on the removable board and found some dirty connections on the boards and sockets so i cleaned them up with a eraser and 480 grit paper for the sockets and I now have 9 out of 12 channels working I also took that 1 circuit breaker...

Drew there is a circuit breaker removed because there was not continuity through it and that is something I'm checking out to have replaced, I did find some on Ebay but I'm just not sure if I should purchase a couple of the from there because you never know what your going to get. Our school is...

I would like to get all the lights controlled one one board someday but I'm looking just to get the other dimmer channels that don't work on the Strand Century Dimmers for now and if I can not get the other 6 channels working then yes I would like to get them all on the LP612 but I believe there...

ok here are some pictures of our equipment and I have found my mistake the control board I'm using for the halogen lights is a TTI Galaxy

I will have to wait until after 1pm today because there is classes using the auditorium in order for me to take some pictures of the equipment we have here. I planed on is keeping the LP612 for the LED lights only for now. I'm trying to get the older Strand Century Dimmy boxes to work on all...

If anybody would like to see our stage it was featured in the movie Street Kings 2, Ray Liotta is dressed as a dog in the beginning of the movie and you will see how old this building is

I apologize for the language difference, this is the first time I have worked on this kind of stuff but I had the old conventional lights plugged in our old Galaxy board with Sinche Jones 10 pin plugs then I changed the plugs to Sinche Jones 8 pin after determining that 1 - 6 are for channels...