Recent content by seg

  1. S

    JBL PRX 418S, good amp?

    Hi, I have a pair of JBL PRX 418s Subs. (my mains are PRX415) Power Rating 800 W/ 1600 W/ 3200 W, 2 hrs (Continuous / Program / Peak) I'm wondering what amp is better and why? Crown XTI 4002 8-Ohms: 650w 4-Ohms: 1200w 2-Ohms: 1600w Or QSC PLX 3602? 8-Ohms: 775w (EIA 1 kHz 0.1% THD) 725w...
  2. S

    Parametric EQ with my DR260

    Hi, Have a Drive Rack 260, and JBL PRX 415M. What do you recommend for parametric EQ settings?
  3. S

    Driverack 260

    Hi!! I got a RTA mic for my Drive Rack 260. I positioned the mic inbetween the speakers about 20' out or so. When I used auto EQ for the GEQ, the low end was reallly high. I did have the pink noise at performance level. What do you recommend to avoid this? I know nothing is perfect, but it...
  4. S

    DBX DriveRack 260 Parametric EQ

    Want to utilize some.of the.advanced features such as delay and high pass filter.
  5. S

    DBX DriveRack 260 Parametric EQ

    Hi! Still no luck with getting this rig to sound good. Do you have any other ideas? I tried setting some EQ points on the parametric, and worked with the bandwidth too. Some specific ideas or settings to try would be great!! Thanks!
  6. S

    DBX DriveRack 260 Parametric EQ

    Hi, Where did you find those specs? I looked on Yamaha's website and all I saw was 55hz-16khz (-10dB) Thanks!
  7. S

    DBX DriveRack 260 Parametric EQ

    I have Yamaha S115V's and they are full range.
  8. S

    DBX DriveRack 260 Parametric EQ

    Hi, I am a DBX DriveRack 260 in a DJ application with mainly digital music MP3/M4A There is a 4 Band Parametric EQ that comes with the 260. I am not sure what 4 frequencies I should start with and what their bandwidth (Q) should be. Does anyone have any suggestions? XOVER: High Pass Filter at...
  9. S

    Martin Light Jockey Help

    Hi, As far as definitions in your last post, we are on the same page. I created a cue with 3 sequences. I want to run sequence 1, after it is done, then sequence 2 will run, after it has ran then sequence 3 will run. Then back to 1 and loop until I change the cue. The way it's set up now...
  10. S

    Martin Light Jockey Help

    Hi, I created a 3 sequences with 3 steps/scenes each. I created a new cue, and added each sequence to the cue and saved it. In the cue manager, I see the 3 sequences, and the first one says (Scene) 1:3, 2:3, 3:3, then it goes back to 1:3 and goes through the loop all over again. The other...
  11. S

    Lighting design question

    What types of ideas should I throw into my scenes?
  12. S

    Lighting design question

    Hi, This is for DJ purposes. So it is a different venue every time. Either for school functions or weddings. What do you think some good scene ideas are? Thanks!
  13. S

    Lighting design question

    Hi, A few questions. I know that the designing a light show using moving heads, scanners, etc.. is an art and creative thinking is a plus. I'm a smart guy, just not a creative thinker. Can someone please give me a few starting tips on how to design a good show? Thanks!