Recent content by Seth Morrison

  1. Seth Morrison

    20Amp Twist Lock connectors - outdated vs L6-20 and L6-15

    Oh I've definitely come to realize this! The source of my puzzle
  2. Seth Morrison

    20Amp Twist Lock connectors - outdated vs L6-20 and L6-15

    Super helpful, thanks. I was able to find where you can still buy the pre-NEMA ones that are installed through the Hubbell site. They're listed as "for replacement use only." Fairly pricey, relative to stage pin and newer connectors.
  3. Seth Morrison

    20Amp Twist Lock connectors - outdated vs L6-20 and L6-15

    Hello!I am in the process of repairing fixtures and cables at a theatre that has not had much maintenance over the past decade. I discovered a discrepancy in the twist lock connectors when I tried to swap a new one from our stock with an existing one. The ground pin for the new plug was facing...
  4. Seth Morrison

    DIY Gobos in LED mover

    Hello!The company I am working for recently purchased some iPro Slides with the goal of printing our own gobos. However, we wanted to put these gobos in a moving head LED fixture. We checked the melting points and theoretically, everything should have worked fine.Unfortunately, despite this...
  5. Seth Morrison

    Automated Fixtures Chroma-Q Color Force 72 LED Strip

    Here is a video of the que sequence.I tried changing the address to a unit next to it, same result.I also tried using the generic RGBA 8B channel type in the Ion. NothingThanks again, Seth Morrison
  6. Seth Morrison

    Automated Fixtures Chroma-Q Color Force 72 LED Strip

    Hello again, everyone.I've been testing various different ideas and combinations of ideas and unfortunately the glitch is still happening. What I have noticed is contrary to the other units that we have sent for repair, this one glitches in an isolated section of the show. It starts glitching...
  7. Seth Morrison

    Automated Fixtures Chroma-Q Color Force 72 LED Strip

    Our distributor couldn't figure out what was wrong. They replaced the control for each unit, but that didn't solve the issue. Something seems to be wrong with the 4th cell. Thats all I know currently, but they've been sent back to the manufacturer. I haven't been able to find anything online...
  8. Seth Morrison

    Automated Fixtures Chroma-Q Color Force 72 LED Strip

    Certainly- Your help is appreciated!Console: ETC Ion Universe 1: Strand Dimmer racks Universe 2: Elation DMX-Branch/4 -A: Martin Mac 250 Entour (x2) -B: Chroma-Q ColorForce 72 (x8)The CF Units are all in Mode 9 (4ch RGBA). They are powered from wall circuits, with 2 or 3 units per circuit...
  9. Seth Morrison

    Automated Fixtures Chroma-Q Color Force 72 LED Strip

    So, my venue is having issues with our LED strips (Color Force 72) glitching and losing controllability. We open thurday, and already have sent two units out for repair for the same issue. So far, nobody has any clue. Any suggestions would be greatly appreciated. I've attached a link to a video...
Back