Recent content by Shadowmhs

We use these stud to thread adapters on a standard scissor clip. They come in at least two different sizes. https://www.bhphotovideo.com/c/product/824403-REG/Impact_ca_102_Rapid_Baby_to_3_8.html

I'd imagine wurzelbacher staging could help you. http://www.wurzelbacher-staging.com/read-me/

I am trying to create a effect that will scroll through colors on a generic RGB LED fixture. Console is an ETC expression 3. Whats the easiest way to do this? Thank You

Cool Thanks for sharing What fixtures did you use?

Yes mode 4 offers move pan and tilt (16 bit) control than mode 2 (8 bit)

The Mac 500 has 4 operating modes that take different amounts of dmx channels with Mode 4 taking more than mode 2 To find out what mode it is in go to the PSET category off of the main menu and it will show the mode thereM4=Mode 4 M2=Mode 2You can find out more information about the...

Why not just use 2 of the single port extenders?

My boy scout troop used dome lights that we got from camping world then bought LED bulbs to put in the dome lights from Superbrightleds.com to light our trailer and dinning fly.Here is one of the dinning fly lights. The trailer lights are just mounted and hardwired to the interior roof.

which fan is the CPU fan?

Today I went up too the booth and found our Etc Ion shutdown when I powered it up it showed that it had shut down because of a thermal error. the booth wasn't overly hot (maybe 75 degrees) and the board had been running for maybe an hour. Does anyone know what might have caused this and how we...

Thank you a lot

Does anyone have the key presses needed to move a tab from one screen on theetc ion to the other? We have a dress rehersal soon anD I need to do this.

Thank you guys it Now works :)

On our ETC ION in the CIA it has been showing "searching for master" and can't find one. During this time the console will not accept any commands (via keypad or subs). We have only this console, and it outputs straight DMX (no nodes, RPUs, RVIs, or RFRs) and it has never used the ETC Net. I am...