Re: Solutions for a 220v Fresnel Tungsten on a 110v system where 220v is not availabl
Yeesh, that's no good. Will be making a trip to home depot for a replacement if that's the case.
Re: Solutions for a 220v Fresnel Tungsten on a 110v system where 220v is not availabl
It would be for video, we'd use a lower watt light if we needed less light. We have some situations where we will need to use a higher fstop due too some steadicam or dolly movement, possibly outside at night...
Re: Solutions for a 220v Fresnel Tungsten on a 110v system where 220v is not availablGotcha, on the cord I'm not seeing a slide dimmer all I see is the red on off switch is this what you are referring to? If so I'll change the cord out for sure once I get it. On some other posts on the web...
Re: Solutions for a 220v Fresnel Tungsten on a 110v system where 220v is not availablAwesome, great info and makes total sense. I'll double check the dimmer when it gets here but I'm assuming by dimmer they mean the on and off switch on the cord. I haven't seen any with a dimmer inside...
Re: Solutions for a 220v Fresnel Tungsten on a 110v system where 220v is not availablYou guys have been great, guess the bulb it is. For any one looking for the same thing here is a great comparison video and he ends up changing the bulb. Pro As Arri 650W Light vs. Arri 650W Light on Vimeo...
Re: Solutions for a 220v Fresnel Tungsten on a 110v system where 220v is not availablGot it, I found some actual specs not sure if this helps: Bulb it comes with 2000w CP37, BP or 2000w CP41, MP. Base is G38.
Re: Solutions for a 220v Fresnel Tungsten on a 110v system where 220v is not availabl
Looks like they are JIETU FRESNEL DTW-2000W. Can't really find any specific documentation so not sure if that helps at all.
Re: Solutions for a 220v Fresnel Tungsten on a 110v system where 220v is not availablYes ARRI knock offs for sure :) Looks like its a round two pronged plug from what I can tell from the ebay photo. I don't mind switching out plug/cords or bulbs I just want to see how to get the maximum...
Re: Solutions for a 220v Fresnel Tungsten on a 110v system where 220v is not availablThanks for the reply, I'll give the bulb a try first. Absolutely agree on the electricians running a 220 it would all be a matter of budget on getting them out there to add it and if the location would be...
Looking for a solution to a fresnel light problem. Due to budget we bought one of these to use on a low budget short film here in the US: Fresnel Tungsten Video Continuous Lighting 2000W as ARRI Pro Video Kit New | eBayAfter purchasing we found out at a few of the locations we would not have...