sk8rsdad's latest activity

  • sk8rsdad
    That's great! It covers every stage use in my venue. Now to wait for the CEC to review and integrate the changes, then OESC to adopt...
  • sk8rsdad
    sk8rsdad replied to the thread The Perfect Mover?.
    Higher output light engine More options for LED engine manufacturers Fewer "binning" issues than discrete LEDs have simpler optics...
  • sk8rsdad
    sk8rsdad replied to the thread The Perfect Mover?.
    Most LED profiles have opted for a white source and CMY mixing. There aren't many that have an RGBxyz engine with framing shutters...
  • sk8rsdad
    When we did 39 Steps we bought a piece of FR muslin and strung it up on a rope so it looked like something hastily contrived for the...
  • sk8rsdad
    A few years ago it was sort of true that incandescent fixtures were brighter than LED but that's not the case these days. I'm not sure...
  • sk8rsdad
    sk8rsdad replied to the thread ColorSource SPOT.
    Also, if ETC finds a design or manufacturing issue in an out of warranty batch they may offer a fix at little or no charge. They really...
  • sk8rsdad
    We use one from time to time for scenic painting, for those that remember how to print a transparency.
  • sk8rsdad
    If you could reach in and pull the center of the fresnel lens out like one of those collapsible drinking cups it would form a PC lens...
    • 1574346842407.png
  • sk8rsdad
    sk8rsdad replied to the thread Cyc lighting...what to choose?.
    Another option is a set of CS pars with suitable lenses to light the top (wide oval) and bottom (narrow oval) from above.
  • sk8rsdad
    A Fresnel lens is a stepped PC lens so the fixtures are likely PCs with cheaper, lighter, less prone to heat stress lenses. Edmund...
    • 1574305259908.png
  • sk8rsdad
    You may want to try doityourselfchrstmas.com. They do this sort of stuff all the time. Stick with 12 volt LEDs and save yourself the...
  • sk8rsdad
    sk8rsdad reacted to dvsDave's post in the thread Welcome to ControlBooth 5.0 with Like Like.
    This is the launch of the next gen ControlBooth.com. In technical terms, we upgraded from Xenforo 1.5 to 2.1, but it's a massive...
  • sk8rsdad
    sk8rsdad replied to the thread Curved pipe and drape source.
    Do you happen to know any electricians or metalworkers with a tube bender?
  • sk8rsdad
    sk8rsdad reacted to SteveB's post in the thread Deserved article with Like Like.
    We are really proud of this guy. We all knew 20 years ago he was going somewhere, really talented guy back then and got better...
  • sk8rsdad
    @Les the GM function still exists on modern boards. What doesn't exist is a dedicated hardware location for the GM. Every fader on the...