Up for sale are Colorblast 12 RGB PowerCore black frosted fixtures (Priced each). Units were used inside for an art display for about 2 months. Great condition and wires are short because they went into a junction box. ColorBlast Powercore high-performance LED fixtures combine rich, saturated...
Rosco CTB 202 w/ and w/o light diff in 5.25 and 6.3 (ParNel)- New in package some in frames $35.00 each
Rosco R80 Blue NOS in frame 6.3" in 7.5" frame $35.00 each
Rosco Primary Red NOS in frame 6.3" in 7.5" frame $35.00 each
Rosco Violet/Blue NOS in frame 6.3" in 7.5" frame $35.00 each
Rosco...
The relay should click on as soon as the unit is powered. It is located right behind the main board on the bottom. You should meter 24v across it. The hot come straight off the main board, while the ground side starts at a grounded lug in the head and moves down threw the thermal and into the...
Sorry for the second post...Qty: 9 Colorblast 12 Powercore Black $175.00 each
Qty: 2 Wybron ColorRam II 24 Way Power Supply $300.00 each
Qty: 6 Source Four Parnel HID $100.00 each
Qty: 1 ETC DMX Response Optosplitter $100.00
Qty: 3 ETC ETCNET2 Tour Node $100.00 each
Qty: 5 Stage Pin Break Ins...
I have a boatload of L202 Half CTB some with R102 frost and some without. Sizes 5.25", 6.3", 8.25"All either new or like new. Most are in frames-Pics here- https://drive.google.com/folderview?id=0B0j4YfeErC_qRHlDYzA0eGo5MGc&usp=sharing
I know I have seen a few people on here experimenting with wireless DMX and costumes. Has anyone found a "decent" and "reliable" wireless DMX TX/RX system that can be integrated into costuming? Looking to basically run a few channels of 50/50 led strip tape. Distance would be less than 100ft LOS.
Hog using a SMPTE master fader and programming every for show to fit within the 24 hours in SMPTE time code. Uses a show control master unit to adjust as needed.
The large fixtures are Techno Beams in weatherproof housings. The castle itself is not lit by the scanners. Back in 09' the castles discharge lamps were replaced with LED. They are made by a Euro company called SGM, conveniently distributed by Techi-Lux in Orlando. The series are the Palco 3+...