Recent content by StevieP

Okay, Sorry its been a while, but I am still battling my oby-600. So here is what happened since we last talked. I have taken a good light and set it next to the "bad" light, removed all the covers. I thought if it was overheating I might see a change. I did not. Let me describe the path...

By the way, just heard back from Thinking electronics (the original maker of the part that fryed) they don't make that particular part (sck 0120) anymore but gave me some replacement parts. I thought I would post the email, just in case anyone out there had a similar problem.From Thinking:

Ship- all great points. I acquired most of my fixtures from clubs and churches that stuck them in a ceiling and turned them on for years on end. :) I rehabbed and cleaned them, so you will never have to tell me about the importance of fans and filters! lolI was not aware of the terminal...

Thanks Church,The part I was referring to is an SCK20120 (data sheet found here) But I am not an engineer so I could be wrong. I have a decent meter and I have a fixture that is working perfectly so I did check the voltage they were both within a volt of each other and consistant with supply...

I will check the voltage coming out of the ballast. I know the bulb has been in use since I've owned this fixture. Tim, thanks for your help.

I have some Geni (Irradiant) OBY-600 wash fixtures. I have rehabbed them with new control boards and while using them in a show last weekend one of them blew the Thermistor used to limit the current inrush. I replaced the Thermistor with a part from a spare fixture, but it is running extremely...

Ya, that defines the DDL, however I have forgotten all the DOS commands to send the ddl file to the MLC16. I emailed Leviton and they emailed me back a instruction sheet on how to connect and transfer files. so hit me with PM (or email leviton) if anyone need this file. Thanks for the...

I have booked two shows for New Years and that means I have to get out the old MLC16. I had it all programed and the new kid flashed it. I don't have a disk drive on it and I have all the DDL's. My question is how to I load it from the computer? I would think hyper terminal or something...