Recent content by sww1235

Thank you very much for your replys. I shall contact Global directly for that info. I was hoping my googlefu was no strong enough, but looks like they just don't post that info.

I have been looking at purchasing some F32 ladder truss from Global Truss. I have found their load tables for the horizontal position of the truss, but I cannot find any data on how much weight each truss stick can take when oriented vertically, either from global truss or any other truss...

I appreciate all the help. I am thinking that I will get an interface with analog in/out for backup per lakota651, but I need to do some testing with various interfaces before I will make a final decision.

i was looking at physical space more than anything, I wanted something that was 1 RU or less. I also did not want analog io to reduce complexity and size. Also if I wanted the analog io, it would be to/from the mixer not the computer, which I do not think that most interfaces offer.

I was looking at physical size more than anything, as 1 RU was the max i could fit in my rack. I did not want analog io as I did not need it

Cool, I will probably use dante. I will have to test this further before I make a final decision.Just in case this does not work, as I need to use the ethernet connection for internet access as well, does anyone know of an audio interface that goes from USB to some digital audio protocol with...

Are those layer 1 protocols or layer 2 protocols, meaning can I run them through an ethernet switch

So what I am hearing is that I should just get a mixer that has a digital audio interface built in. I would prefer not to be locked into a particular mixer. So if I can change my question slightly, is there any audio interface that will go from a usb or other computer interface to a digital...

@bishopthomas unfortunately the mac mini that I will be using does not natively support firewire. Yes I know that i can use an adapter, but I wanted to have that port open for other uses.

It would not let me edit my previous post, so here is an addition. I want to have the audio from those programs going into a digital console that is an equivelent size to the LS9-16.

I want to run audio into and out of skype, teamspeak, and mumble, on seperate channels on teh mixer, so I am going to route the audio internally using soundflower

@AudioGreg do you know if it will show up as a standard audio interface, or do i need to use it with specific software?

Thanks for the feedback, I just used the ls9 as an example digital console. I just want to get 6 channels of audio into and out of a mac mini, with no AD/DA conversion. I have only used the LS9 and know about the digital input cards so that was my idea, but if you have any sugestions for...

Hello allI have a question about digital audio interfaces. I am thinking about purchasing a LS9 16. I also have a 16 channel usb audio interface running audio in and out of a mac mini. I noticed that I can buy a digital card for the console that will let me send adat or the like directly into...

so how does the audio interface show up in the drop down box for interface selection