Recent content by TBNAudioEngineer

PETER.... I use the Mix-B of our 32.8 for our effects send, and return on ch32. offers tons of options, like montoring mixes dry/wet

Vocal Handheld: Beta58 Lav: Sony Ecm 77 Small Vocal Ensembles: EV condersers Large Vocal Ensembles: Shotguns Ambient/Hang Microphone: Sony ECM 77 Floor/Boundry: Kick: RE20 Snare: SM57 Toms: EV condenser Hi-Hat: Overheads: EV condenser Ride: Auxilary/Misc Percussion: Acoustic...

Nice, Thanks for sharing that one. I wouldn't have thought of it. I've got a TC Electronics, M XL ONE and I cant' wait to try it out. THANKS! Jonathan G. Phillips TV Audio Engineer

I been using Procells for about 2 years now without any "bad batteries" We use the 9v and the AA. Before we used Energizer Industrials, but I have timed the two side by side, the Procells last over an hour longer, consistantly. The engineer before me would reuse cheap batteries 2 and 3...

I been using Procells for about 2 years now without any "bad batteries" We use the 9v and the AA. Before we used Energizer Industrials, but I have timed the two side by side, the Procells last over an hour longer, consistantly. The engineer before me would reuse cheap batteries 2 and 3...

Easy Drum MikingThose are some good tips. I've spent over a year working on mic technics for LIVE TV recording, one thing I've learned, is sometimes drummers will leave some ring tone in there TOMs, which sounds terrible. You should correct this if you notice it. Most of the time drummers are...

For MD units WITHOUT the APAUSE BUTTON.Hello ALL, I'm the Audio Engineer for a TV Station in Ohio. We use both Cd's and MDs for nearly all of our TV shows if we don't have a live band. Mds are great, and to simplify recording your tracks to MDsm if you can, burn your tracks to a CD first...

If using WHICH MACKIE??There are a few different models of mackies, some aren't selectable PFL in solo mode. The VLZs (24.4 and 32.4) use PFL. the 8bus (16.8,24.8, and 32.8 ) series use AFL for the solo, and is not switchable. EQing "hot frequences" can remove feedback, but you have to...

LED FanaticsRadioShack LED are far overpriced for the quality of the LED. If you want cheap, AND QUALITY LEDS order from superbrightleds.com You can get 10mm leds for under $2. I use them for my car in the headlights, turn signals, and brake lights. The very best on the market currently are...

I'm the Audio Engineer for a TV station in Canton, Ohio. I've been with this station nearly four years, and prior had a few years experience with FOH mixing for bands. Anyway, we've been using ECM-77s for our interview sets, but I've always had problems with the host mics picking up the guests...

I vote the Audix Mic. Often used in Bradcast Recordings, as well as for album cutting.

Behringer DEQ2496After reading the entire line of posts, a few things came to mind. First, the ultra graph EQ is a neat little EQ if you'll just be doing basics, but who ever posted the DEQ2496 was right, it's the best EQ Behringer makes, which if you're going to be doing in depth EQ...

MIC LOCKERTBN mic locker as follows 2 Audio Technica Shot gun mics :( 1 Byerdynamic Shot gun mic :D 9 EV studio Condenser mics :D 1 EV RE20 mic :D 2 Samson Airline UHF Wireless Packs :evil: 22 Shure SM58 (10 w/switches) :D 3 Shure SM57 mics :D 2 Shure 251 Dynamic mics...

nix a MACKIE??Really? There are people out there that would do that?!?!! I've been using MACKIEs my entire career, and for entry level, MACKIEs are IT! Peaveys are not worth the money. And a powered board? Whoever replied about powered speakers was right, that's the way to go if you want to...

I'd say you'd probably have to determain where the sound is going to "leak" from the most and position your mic near there inside the office pointing into the office where the unwanted noise will originate, and put the speaker near the "leak" area, pointing out of the office eg. (under the...