Recent content by Thos1000

Probably a silly question but it's bugging me. I've very recently started using the M1. like a week ago. I found out that it hadn't had a software update for years. After updating it last night, till 4am, I can't figure out how to get the live output to the external monitor. Does anyone know how...

Having problems with Hog 1000 sometimes with data screw ups. Memory hasn't been increased, but it's only flash ram. Do you think adding flash could help? I've reseated all chips but just don't trust the console

Anyone happen to have Neutron hazer XS parts

I can't believe I forgot how to do this but, what is the syntax in order to see your cuelist in the center LCD screen on the HOG 1000? As is you don't have an external display.Thanks in advanceAnd if you see this Derek, how's it going bro.

Since I didn't have enough 208 and L6 connectors I ended up wiring it to 120. It works fine. These are the dirtiest fixtures that I've ever seen in my career. After going through them today, I've got 3 maybe 4 out of the 10 working. I can only afford to purchase 1 new lamp, they cost $250...

It was the cord that comes with the fixture, the blue that twists and locks, the other end was a regular stage pin, 3 pin. Brown to neutral, blue to ground. I don't know what kind of female stage pin that it was plugged into. I already had that manual. So I took the connector apart for the...

I guess what was messing me up is when I unpacked the fixture, it had a 3 pin turn around on it. But only 2 wires going to the 3 pin, blue to the center ground pin and brown to neutral, or what would be white. Now I don't know how or what this 3 pins female counter part was wired. But, they...

But isn't it brown to hot and blue to neutral?

Hey guys, I just got 10 Giotto 1200 Spot fixtures from China, I know the fixture is from Italy. There is a Blue and Brown wire on the power plug. At this time it has a 3 pin connector on it. One wire going to line the other going to ground. We have 208 and of cuorse 120. How should I hook...