Recent content by Titere

Thanks for the tip about the banners (sag movement) and the suspension wire. I may be able to stabilize the main bar on the sides. Will check that out 👍

@macsound Thank you very much for the material information. I am using https://supraprint.pl/en/large-format-printing/ They have about everything, looks like. I will ask the sales person I am in contact with about the canvas material you describe 👍

I just this, framing of big format print with “tent poles”. My “banners” are as tall (4m) and half of that width. I can print them with narrow pockets on the sides and insert such “tent poles”. What do you think? I still must have a thicker pipe at the top to hang with rings on the bar...

Thanks for the suggestion. :) It looks good, but maybe expensive. I may need a simpler solution :)

Thanks for the idea. Did you have small holes on the backdrop, like the picture above show? Does the backdrop looked quite flat (no wrinkles) after pulling it side to side on stage? I may use a metal pipe inserted in the top of the backdrop, and then hang it up from that pipe, maybe with a ring...

even if this example from the photo is just a hanging textile, it looks quite flat, almost as if printed in some solid material.My images are wider, 4 meter tall 3 meter wide. To frame them would make them very heavy, so I would like just to insert a tube on the top (to hang it up) and one at...

Hi! By “banners” I mean big format printing on textile, that could eather hang up from a bar inserted in a “pocket” on the upper end, or could be framed on a metal or wooden frame like a canvas and then hanged up. Here is a photo of such products, just downloaded from the internet:

Hi all. I just arrived here today looking for some technical advice on mounting up movable banners on stage. I am an illustrator, graphic designer and for some years now have also been designing scenography for family oriented theater productions (outdoor theater and indoor). The productions...

Hi! I have several tracks (bars?) where I can hang the up from, but I am not sure of what mechanical system I must use so I can gently slide them from one side, to the middle, or out of the scene sight. I just posted some sketches and measures on the answer above, if you mind to take a look and...

Hi! It is indoor. The banners are not heavy, but it depends how I finally mount them up. Ideally the best is that the banners just hanged up, with no frame all around. It is less work. But I dont think we can slide them properly sidewise, without a frame. Not sure about that though. Here I send...

Am I posting under the right themed forum? I am new here :)

Hi! I need some help with a rolling (wheels?) system for moving sidewise big format banners in or out of stage. The prints are 3m width by 4m tall. I will preffer to hang the big banners from the top (not to frame them completely) if possible. Any idea VERY much appreciated. :)