Recent content by Toadie

Just out of curiosity I took them off DMX and put them into Mater Slave... perfect synchronization, so it looks like I have a choice to make. Run the party with them in Master Slave or keep working on the DMX setup.I also think my speed slider might not be working on the controller. I move...

Yeah I realized that after I posted it lol and I do have it terminated.

I have a feeling this may be a noob question but from what I've gathered most DMX items come down to the fixture you're using. I've run through the manuals and I can't seem to find anything on speed adjustment setting, light range adjustments etc. I have two issues perplexing me now.Setup -...

Well that is weird... so it's fixed but I'm not sure I understand why. Here's what I did...I took the working Vue Channel 97 and hooked it up to the controller as a standalone device. Since the DMX 40 has pre-assigned channels it was Bank 7. Worked fine. Term, no term, everything worked...

Thanks for the help guys, much appreciated.The manual I'm reading is the DMX 40A which is in in English but you're right Chris, for some reason the DMX 40 manual is Spanish. Thanks for the tips on the terminology as well.jglodeklights and mstaylor, I'm going to try everything you suggested...

Oh I didn't know that it would be make and model dependent, I thought it might be an embedded DMX thing.Four Chauvet Omega 1's tied into a DMX 40 controller.

I configured my controller and lights into scenes, and then loaded those scenes into a chase. Everything worked well but I realized that the manuals aren't detailed enough. Is there a place I can go to learn more?For example, my scenes went fine, the chase worked fine but the lights when...

Sorry yes you are correct. My DMX scheme is inline with the manual, sixteen addresses per channel.Channel 1 address 1 - currently not in line, removed completely to take it out as a factor Channel 2 address 17 Channel 3 address 33 Channel 4 address 49 Channel 5 address 65 Channel 6 address 81...

ah sorry Jordan I must have read into it. I belong to other forums and I know the pain of noobs who don't do the work themselves so I guess I took it personal thinking that I was one of those lazies lol.So here's the deal, I don't believe any signals are being sent. I've erased all the all...

I've read the manual, it's my first post, I'm not an idiot... I've also searched. Dip switch 10 is Auto Standalone mode and it's set to off on both fixtures.

I have two Chauvet Vue 1.1 LED lights hooked up to a DMX 40 with some Chauvet Omega 1's. I've verified that all the lights work, all the DMX addressing is correct, and that individually I can control all the lights. Here's the odd thing...Light two, channel 3 (DMX 33) looks like it's in auto...