Recent content by wahlwesle

  1. W

    Control/Dimming 2'x4' LED Panel Control - ETC Foundry or Echo

    Unfortunately, I lost my budget to new air conditioning duct. We discovered that all of the insulation had deteriorated around the duct feeding our classrooms. So, we will just be retrofitting the existing troffers with non-dimmable direct wire LED tubes, which we have had success using in the...
  2. W

    Control/Dimming 2'x4' LED Panel Control - ETC Foundry or Echo

    After reading the manual on the Mini Panel, I did not notice any mention of this ability. Are you saying that the panel can be programmed to do this, or will it have to be done through some other means?Since the Mini Panel is a relay panel with 0-10v control capability, I assume that the relay...
  3. Slide1

    Slide1

    Current wiring diagram.
  4. Slide2

    Slide2

    Proposed wiring diagram.
  5. W

    Control/Dimming 2'x4' LED Panel Control - ETC Foundry or Echo

    This is surely a newbie question, but can someone explain how the Foundry relay works when the DMX signal tells the lamps to dim to 0, or in other words turn off? Will the led drivers still be receiving 120V power, or will the relay open the circuit causing power to cease to the drivers?If...
  6. W

    Control/Dimming 2'x4' LED Panel Control - ETC Foundry or Echo

    This seems to be what I found when researching available lamps. We have the opportunity to re-purpose the old troffers in other areas of the building as well, so the LED panel is a win for installation and price.This was exactly what I was looking for and is what was quoted to me in the...
  7. W

    Control/Dimming 2'x4' LED Panel Control - ETC Foundry or Echo

    I am new to this forum and new to lighting in general, but I have done some research to try and educate myself before asking questions. I have been the sound guy at our church for quite some time, and have the fortunate opportunity to look at ways to improve the lighting in our sanctuary.The...
Back