Unfortunitly I have tried all of those... My next attempt will be to delete both fixtures and put them back in for the problem units. Thanks for trying to help.
Hello all,I am having much trouble with the ganging tool. I have instrument twofer together that no longer should be. I can not seem to find a way to delete the twofer (gang). I am not able to select it or anything. I can change the dimmer and channel number via the OIP but thats it. Any...
Hello all,I am looking for advice/opinions/experience with using PC Consoles and off line editors. I am not the most computer savory but I am not uninformed if that makes any sense.Currently I have only Apple/Mac computers and I would like to be able to run and use off line editors and PC...
When used in reference to lighting, is a Follow Spot term. A pick up is when an operator fades in on his subject. A pick up will also include specifics such as frame, iris, intensity, and if lucky a location.
Thank you both. Thats what I thought but I wasn't positive. By "next size up" I mean the 250 but I also couldn't remember what its count was, I oddly haven't used the express line as much as would be expected having learned on ETC. My board was the Expression 2.
Thanks again.
Hello All,
I had a quick question I was hoping you could help me with.
I have an upcoming show that I would love to pre-program. The console I will be using is ETC Express 24/48. I have access to an ETC Express 72/144, (possibly the next size up not completely sure). Would there be...
Hello All,
I was hoping you could help me with a VectorWorks question.
When having the 3D Beam drawn with a Par unit how can you rotate the beam to the oriaentaion you want. I.E having the beam going SL -SR?
Thank you for all the help, I couldn’t find this answer in the manual...
Hello all,
I was wandering how you show the difference on the plot when hanging some fixtures on the bottom rung and the top rung. In general would be fine but im specifically thinking in terms of VectorWorks, im using 2011 but any recent year should be good.
Thanks for the advice.
Hello,
I am having trouble getting my instrument labels (color, channel, dimmer....) to display properly when they are hunger vertically (facing SL/SR). I go and make a new label legend with the unit on its side and then place the info so the color is on top and dimmer and channel on bottom...
Thank you very much! That did it!I may post a new thread for this since you may be the only person who sees it but, How would I insert a vertical piece of truss?
Hello all,
I am having some difficultly trying to do what I would like to do.
I have a 3D extruded cube and I would like to make it so that it is a see through Mesh, is this possible to do? The only way I've found to do more than a color is to go into the object info box and go to render...