Recent content by wyatt20019

it is a permanent install. what is the easiest way to have a POST amp volume control? because sometimes we have to alter the volume levels depending on the type of song, IE: if brass plays loud in that song sometimes they signall us to turn it up.

we have two peavey wedges daisy chained and two little EV monitors. money isnt a problem.

i need some advice on the best way to fix this problem. i have 2 rows, in the first row is a 5 person brass and second is a minor 5 person orchestra. we have 4 outputs from the board for monitors. right now we use 1 for each row, so two outputs for that, one for the choir monitor and one for...

K. That is a will do. if i dont have a chance to call could you please post the DMX traits/ what channel does what on here. it wouldnt need to be the values. but ill probably have time to call. thanks

i recently aquired two of the OLD vison 575 that i heard where from when elation and robe had a partenership. anyways i need a usermanual anyone know were i could find one fast? elation said there guy will not be back till mon. but i need it sooner. thanks

i was just looking for kinda a generall one so i could go from there.

not real sure. we have elation design wash 250's, elation CMY zoom 250's & Elation LED trackpod 84's. yes i realize they have color filters but i wanted something i could go off of so i could adjust acordingly.

is there such thing that tells you so much CMY = this color. kinda like a recipe book for lights? does this exist. like 255 C & 100 M = this color?

so the by the "ground" you mean the wire that isnt hot? and where can i find the resistor/terminator.

what do i ground it too? and could i use a DMX terminator on the last beltpack?

thanks, how should i wire it to an xlr head?

so what do i need on top of this? http://cgi.ebay.com/AC-DC-POWER-SUPPLY-ADAPTOR-30-VOLT-30V-30VDC-500MA_W0QQitemZ270261524815QQcmdZViewItem?_trksid=p3286.m20.l1116 and how do i do it?

so how do i set this up? can i just solder the hot wire to pin 2 of an XLR head? or do i have to have the capacitor thingy?

the 30V one is DC. not sure about the other one.

i dug through some old power adapters and found these. adapter 1: input:100-120V, output: 24V----0.75 adapter 2: input: 120-127 69hz, 350mA, output: 30v---500mA (AC power adapter)...