Recent content by zailabouni

My facility reccently added 3 Altman SS-CYC-100 Spectra-Cyc lighting fixtures and 3 Apollo LED pars as well. I love the apollo fixtures but am having an issue with the Altman Cyc lights. On the Apollo pars I was able to set the fixtures in 4 channel mode: 1-3 are the RGB, and ch. 4 is master...

Oh, And I rolled the dice and hooked the pump to a dimmer channel. I worked well. No problems with the pump or dimmer.

thanks for thought. Yes there is quite a bit of framing, the masonite was just to make a smooth curve. Since most of the show the fountain is suppose to be "frozen", I simply decided to line the basin with 6mil plasic. I then cut a piece of plexi to set the pump on to give it a solid base and...

Thanks. Makes a lot of sense. I will leave it be. I can't use a larger outlet to releive pressure, but I will try to replace the T with a cross and a ball valve on one side, that should give me the adjustability I will need to fine tune the pressure. I appreciate the advice.

I recently replaced 16 lense retainer rings out of 24 total source four pars (750). This was over 10 years of use. Talked to my etc rep and he said he hadn't heard of it. We only run 575s in our fixtures rated for 750, which made it even stranger. This facility has a lot of different...

I think I made a huge mistake. I built a working water fountain for a production of Jack Frost. I built the basin with a 3/4" plywood base and and the sides with 1/4" masonite. Everything fits together very tightly. First I caulked the seems and then made what I'm affraid is a huge error. I...