Control/Dimming Lost cues on ETC Ion! Anyone know a way to reverse?

Ok so in testing a new fixture I open our training Show to just patch the new fixture in and play around with it and seeing what it did. After finishing messing around with the fixture I opened a previously saved show profile that I personally hit save on and the cue list is empty. There has to be something that I'm just not seeing or doing wrong. Any help would be much appreciated cause this show goes up Saturday and we don't have time to rewrite. Thanks to who ever can help me

are you sure you are in the right cue stack, I know the geo can have quite a few but if you arent in the correct one it will not show up.
Also did you load the show correctly, You can choose to only load parts of a showfile and not the whole thing.

I know I loaded the whole show file. I've never dealt with loading other cue stacks cause of a lack of need. How do I look at that?

Call ETC you will get a person that will help you..they are very good at this kind of thing...

Double tap the [Cue] key, near the bottom of the new tab that opens up you should see a list of your cuelists.

To load one of those lists onto the main playback, type this [Cue]{y}[/][Enter]. Then press the [Load] key

Chances are you recorded it as Cuelist 1, so press [Cue][1][/][Enter] Then press the [Load] key.

However, if you last saved the file with your cuelist on the main playback, it should still be there... if you're sure you loaded the entire file, i would try loading an older version and see if your cuestack is there.

Worse comes to Worse you can call ETC tech support and they might be able to talk you through the steps of finding this cuelist.