Matt_Tech_12
Member
Hello I am in currently a bit of a tight spot.
I am trying to trigger my light Q's in an ETC ION via MSC messages in Qlab 3. I have done everything just about every manual says to do in terms of device ID, Shocwontrol setup in the console, and making sure that the MSC cue in Qlab is set to trigger GO and its target light cue on the console.
I am using an M-Audio UNO to go from my laptop directly into the back of my ION.
Please, any help is welcome.
I am trying to trigger my light Q's in an ETC ION via MSC messages in Qlab 3. I have done everything just about every manual says to do in terms of device ID, Shocwontrol setup in the console, and making sure that the MSC cue in Qlab is set to trigger GO and its target light cue on the console.
I am using an M-Audio UNO to go from my laptop directly into the back of my ION.
Please, any help is welcome.