Colorsource 20 and cueing movers

I'm just getting to know this console. I think I'm getting the hang of it.

I'm trying to figure out something pretty specific and it might require some kind of workaround.

I have a cue where my iCue/Iris is opened wide. in the next cue I would like to iris in tight but I don't want to do it all at the same speed. I really want to decelerate the iris as it gets closer to the end of the cue.
I know there's no specific function for this in the CS20 but I feel like there can be a workaround based on in/out timing but I can't seem to wrap my head around it.

Anybody got any thoughts?

Multiple cues that automatically follow each other?

5 seconds from 100%-50%
then 5 seconds from 50%-25%

TheaterEd said:

Multiple cues that automatically follow each other?

5 seconds from 100%-50%
then 5 seconds from 50%-25%

Click to expand...

I would do something like this, and if you need it smoother, just add more follow cues to get the timing perfect.

Yup. Looks like that's the option. Thanks!

You're looking for what's generally called a "spline" curve. It wouldn't surprise me to learn lighting desks don't do that; it's more common on, say, camera positioners.

Does the CS line have dimming curves? If so the Iris could be patched with an fairly extreme curve. That would make the other cues act the same way!

I'm considering the ColorSource 20 for a Dance Studio here (upgrade from the Express). I'm assuming from this thread that it won't do multipart cues like the express used to?

Since it's so new not many of us know much. Sounds like a simple question for the ETC sales or support folks. If they don't know they will find out!