Hexagon Platforms

shayward1

Member
Hey all.....got locked out of my old profile, so new name! I have a new to me challenge for my upcoming scenic design which includes a series of hexagon shaped platforms. Usually for my platforms I create a 2x4 frame underneath and top it with 3/4" ply. For this one I am figuring on staying with the 3/4" ply on top, but I am wondering what the best way of framing them would be. Would it be best to build a frame around the outside edge doing a miter joint at the angles, or some other method?
 
Do they move or stay in place?

If it's a true hexagon, the inside angles will be 120deg, so you could miter the angles at 60deg, or run the ends of the framing to the edges and cut 30deg angles. Add some facing and call it done.
 
Yes, in general the framing theory would be the same for hexes as rectangles; a frame around the perimeter, with internals keeping unsupported areas to a max of 2' x 4', and supporting all seams.
 
  • Like
Reactions: Van
Depends how clean and finished it needs to be. If it doesn't matter, cut the lid and frame to fit is the fastest.

If you want it to look sexy, then bisect all your miters for clean corners with no endgrain.

As far as the framing material itself, any of your standards would work: 2x4, 1x6, 1x3 steel, ect. Once again depends on aesthetic and your shops capabilities and budget
 

Users who are viewing this thread

Back