curtis appleby
Member
i am trying t add a small number of portable dimmers to a semi-permeate truss rig that will have primarily LED's.
the leds will be powered with a 6 circuit lex bento box with L21-30 pass thru, fed from a cam-> 5- L21-30 pagoda.
since there will be a lot of motors wanted to keep the cable the same.
i am leaning towards ETC merely because everytime i have walked away fro them i've regretted it. cost is somewhat of an issue. ive looked at the smart modules but they are a little short oc dimmers and im over powered. my preference is the smartPack probably 12x10 (i'm going back and forth.) i assume that i can set the head on the dimers so i don't exceed my 30A 3P feed, (less the LEDs). the conventionals would be ellipsoidals. with FOH being mainly branding gobos and the stage pack being highsides for dance, etc.
any advice on either another pack to look at or that this is a terrible idea would be appreciated.
thanks curtis
the leds will be powered with a 6 circuit lex bento box with L21-30 pass thru, fed from a cam-> 5- L21-30 pagoda.
since there will be a lot of motors wanted to keep the cable the same.
i am leaning towards ETC merely because everytime i have walked away fro them i've regretted it. cost is somewhat of an issue. ive looked at the smart modules but they are a little short oc dimmers and im over powered. my preference is the smartPack probably 12x10 (i'm going back and forth.) i assume that i can set the head on the dimers so i don't exceed my 30A 3P feed, (less the LEDs). the conventionals would be ellipsoidals. with FOH being mainly branding gobos and the stage pack being highsides for dance, etc.
any advice on either another pack to look at or that this is a terrible idea would be appreciated.
thanks curtis